Orbit WterMASTER 58308Z Operational

Brass Impact Sprinkler 1/2" Series
Operational Information
Adjusting the Distance of Spray
The distance of spray can be adjusted with the following
methods:
1. Diffuser Pin Assembly
Screw deffuser pin into stream to reduce coverage.
2. Deflector Shield Assembly
Push deflector shield into stream to reduce coverage.
Anti-Backsplash Arm
The Anti-Back Splash Arm is designed to prevent water from
spraying outside of the desired pattern area.
CAUTION:
For outdoor use with cold water only
Do not spray near electrical connections
Irrigation Products
North Salt Lake, UT 84054
Made in Taiwan
Diffuser Pin
Anti-Backsplash
Arm
Friction Collars
Adjusting the Pattern of Spray
The spray pattern can be adjusted with the
following methods:
1. Partial Circle Coverage
Push the trip pin to the down position. Slide the fric-
tion collars to adjust any portion of a 360 degree circle.
2. Full Circle Coverage
Move the Trip Pin to the up position.
Deflector Shield
Trip Pin
Friction Collars
Trip Pin
55032-03 Rev A
Trip Pin