Advertisement
When expecting freezing temperatures, Precision Arc should be removed from the hose and stored indoors to avoid potential freeze damage.
Filter traps dirt particles, prolonging life of your Precision Arc. Clean filter regularly and replace if worn.
Working Water Pressure
Minimum: 20 PSI
Maximum: 70 PSI
Working Temperature
Maximum: Do not operate at temperatures exceeding 120°F
Minimum: Keep from freezing. To prevent damage from freezing water, take the Precision Arc inside before the first winter frost.
Warnings:
For cold water outdoor irrigation use only.
Maximum Coverage: Slide the tabs together and position them off to the side of the spray nozzles.
Turn the knob clockwise to shorten the spray distance and counter clockwise to lengthen the spray distance.
Note: If the spray nozzles have moved past the distance knob you are currently adjusting, do one of the following:
Remove the flow through cap and attach an additional outdoor garden hose and Precision Arc. Actual water coverage depends on sprinkler settings and available water pressure.
Customer Support
1-800-488-6156
orbitonline.com
Orbit® North Salt Lake, UT 84054
©2017 Orbit® Inc. All rights reserved
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Need help?
Do you have a question about the ARC SPRINKLER and is the answer not in the manual?
Questions and answers