Installing the HP 1 10V/220V
Light Rack Option Kit
1.
Remove the fluorescent lamp cover.
2.
Insert two screws, securing the HP 110V/220V Light Rack
Option Kit to the rack frame.
3.
Insert the fluorescent lamp pins into the light socket (1) and
gently turn the fluorescent lamp toward the rack (2) until it
snaps into place.
4.
Replace the fluorescent lamp cover.
Operating the HP 1 10V/220V
Light Rack Option Kit
Item
Description
1
On
2
Off
3
Standby mode
Status
Turns the light on.
Turns the light off.
Turns the light on
when the rack
door is open and
turns the light off
when the rack
door is closed.