Kemimoto B0113-14301CM Product Manual

BEFORE YOU BEGIN
1. Read these instructions and check to be sure all parts and tools are
accounted for.
2. Please retain these installation instructions for future reference
and parts ordering information.
IMPORTANT
1. Please read the installation instructions carefully before you start.
2. If the vehicle is clean and free of other debris, it will be easy to install.
3. For your safety and to ensure a satisfactory installation, please
complete all the installation steps in the order shown below.
INSTALLATION TIPS
1
Release buckle straps from tool bag[1].
2
Install eight buckle straps to the vehicle frame. Do not over tighten
the straps at this time.
(Use Ranger XP 1000 as an example)
3
Attach all buckle straps to tool bag. Adjust the bag to center.
Tighten all the straps. Use elastic loop to store excess strap.
Finish installation.
K www.kemimoto.com K
PRODUCT MANUAL
SKU: B0113-14301CM
Designed by Kemimoto Group
Complete journey of dreams
PRODUCT INFORMATION
1
Tool Bag
NOTE:
- Max Load: 40kg (88lbs)
- This bag can store two tools. Split with sloping
foam pad. One on the foam pad and the other
below.
- The narrow end of the tool goes into the bag first.
1
- If the bottom of the bag shakes violently when
driving, it can be reinforced with a rope or webbing
(not included in this product).
tool
1 of 1
K 2023 Kemimoto All Rights Reserved,Infringement must be prosecuted.
x1