Advertisement
Quick Links
Installation, Operation & Maintenance Instructions
DESCRIPTION
Speakman SentinelPro™ Combination, SM-5020, unites Anti-Scald Thermostatic / Pressure Balance
Shower/Bath Valve with integral Check Stops (CPV-TP), Trim (CPT-5001), and AnyStream® Wall Mounted
Shower Head (S-2280).
SPECIFICATIONS
CPV-TP ANTI-SCALD THERMOSTATIC / PRESSURE BALANCE SHOWER VALVE:
CONNECTIONS: ½" Female Copper Sweat and ½" NPT Male at both the Inlets (Cold, Hot) & Outlets
(Shower, Tub)
FLOW RATE: 1.5 gpm (5.7 L/min) or higher
COMPLIANCE: ASSE 1016 / ASME A112.1016 / CSA B125.16 & ASME A112.18.1 / CSA B125.1 Standards
CPT-5001 T/P VALVE TRIM:
FINISH: Polished Chrome
COMPLIANCE: ASME A112.18.1 / CSA B125.1 Standard
S-2280 ANYSTREAM® WALL MOUNTED SHOWER HEAD:
CONNECTIONS: ½" NPT Female Inlet
FLOW RATE: 2.5 gpm (9.5 L/min)
FINISH: Polished Chrome
COMPLIANCE: ASME A112.18.1 / CSA B125.1 Standard
INSTRUCTIONS
See individual products for installation of the components and warranty information.
400 Anchor Mill Rd. New Castle, DE 19720
SPEAKMAN
SM-5020
SENTINELPRO™ COMBINATION SERIES
SPEAKMAN
12/07/17
www.speakman.com
®
®
Phone: 800-537-2107
92-SM-5020-01
Fax: 800-977-2747
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Speakman SENTINELPRO COMBINATION SM-5020
Summary of Contents for Speakman SENTINELPRO COMBINATION SM-5020
- Page 1 SM-5020 Installation, Operation & Maintenance Instructions SENTINELPRO™ COMBINATION SERIES DESCRIPTION Speakman SentinelPro™ Combination, SM-5020, unites Anti-Scald Thermostatic / Pressure Balance Shower/Bath Valve with integral Check Stops (CPV-TP), Trim (CPT-5001), and AnyStream® Wall Mounted Shower Head (S-2280). SPECIFICATIONS CPV-TP ANTI-SCALD THERMOSTATIC / PRESSURE BALANCE SHOWER VALVE: CONNECTIONS: ½”...
- Page 2 ROUGH-IN SPEAKMAN ® 400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747 12/07/17 www.speakman.com 92-SM-5020-01...
-
Page 3: Maintenance
Keep it looking new by cleaning it periodically with a soft cloth. The use of harsh chemicals and abrasives on any of the Speakman custom finish products may damage the finish and void the product warranty. Please be sure to only use approved cleaners. - Page 4 Make piping connections for all accessories. If your installation is for a shower only, apply Ensure Valve is positioned plumb and level. Reinstall the Integral Stops using a Socket Take care to protect surrounding area when thread seal tape to the lower outlet port and Remove Rough-In Template from Valve.
- Page 5 3) OPEN the integral stops by turning the stop spindles counter clockwise. Turn on the hot and cold water supply valves. Check for leaks. 4) Reassemble the trim parts. SPEAKMAN CPV-TP / CPV-TP-DV REPAIR PARTS ® I I TEM #...
- Page 6 SPEAKMAN CPV-TP ROUGH-IN DIAGRAM ® NOTES: COMPLIANCE: ASME A112.18.1/CSA B125.1 1" 25mm Shower Valve ASSE1016 HOLE FOR SHOWER ARM 6'-6" [2 METERS] TO FLOOR CONNECTIONS: 5-1/2" (140MM) DIA. 1/2" NPT MALE Hot/Cold Inlets: ½” Female Copper Sweat HOLE FOR 1/2" SWEAT VALVE ACCESS ½”...
-
Page 7: Tools And Supplies
Cover your drain to prevent loss of parts. Be sure to wear eye protection while cutting pipe. MAINTENANCE Your new Speakman Product is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. The use of harsh... - Page 8 Temporarily place Handle over splines and adjust the valve to the OFF position (as per the Valve Instructions). Then, align Handle vertically as shown below. Secure Handle to Spindle with the included #8 Screw. SPEAKMAN CPT-5001 / CPT-5401 REPAIR PARTS ® ITEM NO.
- Page 9 SPEAKMAN CPT-5001 ROUGH-IN DIAGRAM ® 1" 25mm HOLE FOR SHOWER ARM 6'-6" [2 METERS] TO FLOOR 7.50in 191mm 5-1/2" (140MM) DIA. 4.31in 1/2" NPT MALE HOLE FOR 110mm 1/2" SWEAT VALVE ACCESS CONNECTION 1/2" NPT MALE 1/2" NPT MALE 1/2" SWEAT 1/2"...
- Page 10 MAINTENANCE The gleaming finish of your SPEAKMAN WATERSAVER® shower head can be cleaned by using mild soap and warm water. Dry immediately with a soft, clean cloth for best results. The flow control device limits water flow to 2.5 gallons per minute.
Need help?
Do you have a question about the SENTINELPRO COMBINATION SM-5020 and is the answer not in the manual?
Questions and answers