Speakman SENTINELPRO COMBINATION SM-5080-ADA Installation, Operation & Maintenance Instructions Manual

Advertisement

Installation, Operation & Maintenance Instructions
DESCRIPTION
Speakman SentinelPro™ Combination, SM-5080-ADA, unites Anti-Scald Thermostatic / Pressure Balance
Shower/Bath Valve with integral Check Stops (CPV-TP), Trim (CPT-5001), Shower Arm with Wall Flange
(S-2500), Hand Shower with flow control (VS-100-PC), Shower Arm Bracket, 60in Shower Hose with built-in
vacuum breaker, and 24in ADA Combination Grab/Slide Bar (VS-153-ADA).
SPECIFICATIONS
CPV-TP ANTI-SCALD THERMOSTATIC / PRESSURE BALANCE SHOWER VALVE:
CONNECTIONS: ½" Female Copper Sweat and ½" NPT Male at both the Inlets (Cold, Hot) & Outlets
(Shower, Tub)
FLOW RATE: 1.5 gpm (5.7 L/min) or higher
COMPLIANCE: ASSE 1016 / ASME A112.1016 / CSA B125.16 & ASME A112.18.1 / CSA B125.1 Standards
CPT-5001 T/P VALVE TRIM:
FINISH: Polished Chrome
COMPLIANCE: ASME A112.18.1 / CSA B125.1 Standard
S-2500 SHOWER ARM WITH WALL FLANGE:
CONNECTIONS: ½" NPT Male Inlet & Outlet
FINISH: Polished Chrome
VS-1001-ADA-PC HANDICAP SHOWER COMBINATION:
VS-100-PC HAND SHOWER WITH FLOW CONTROL:
CONNECTIONS: ½" NPSM Male Inlet
FLOW RATE: 2.5 gpm (9.5 L/min)
FINISH: Polished Chrome
COMPLIANCE: ASME A112.18.1 / CSA B125.1 Standard
SHOWER ARM BRACKET:
CONNECTIONS: ½" NPSM Male Inlet; ½" NPSM Female Outlet
FINISH: Polished Chrome
60in SHOWER HOSE (w/built-in vacuum breaker):
CONNECTIONS: ½" NPSM Female Inlet & Outlet
FINISH: Polished Chrome
VS-153-ADA 24in ADA COMBINATION GRAB/SLIDE BAR:
FINISH: Polished Chrome
COMPLIANCE: Meets 250 lbs pull test for Grab Bars per ANSI Standard; Meets requirements of ADA
Lever Handle for adjusting Slide Bar
INSTRUCTIONS
See individual products for installation of the components and warranty information.
400 Anchor Mill Rd. New Castle, DE 19720
SPEAKMAN
SM-5080-ADA
SENTINELPRO™ COMBINATION SERIES
SPEAKMAN
05/14/18
www.speakman.com
®
®
Phone: 800-537-2107
92-SM-5080-ADA-02
Fax: 800-977-2747

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SENTINELPRO COMBINATION SM-5080-ADA and is the answer not in the manual?

Questions and answers

Summary of Contents for Speakman SENTINELPRO COMBINATION SM-5080-ADA

  • Page 1 SENTINELPRO™ COMBINATION SERIES DESCRIPTION Speakman SentinelPro™ Combination, SM-5080-ADA, unites Anti-Scald Thermostatic / Pressure Balance Shower/Bath Valve with integral Check Stops (CPV-TP), Trim (CPT-5001), Shower Arm with Wall Flange (S-2500), Hand Shower with flow control (VS-100-PC), Shower Arm Bracket, 60in Shower Hose with built-in vacuum breaker, and 24in ADA Combination Grab/Slide Bar (VS-153-ADA).
  • Page 2 ROUGH-IN SPEAKMAN ® 400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747 05/14/18 www.speakman.com 92-SM-5080-ADA-02...
  • Page 3: Maintenance

    Keep it looking new by cleaning it periodically with a soft cloth. The use of harsh chemicals and abrasives on any of the Speakman custom finish products may damage the finish and void the product warranty. Please be sure to only use approved cleaners.
  • Page 4 Make piping connections for all accessories. If your installation is for a shower only, apply Ensure Valve is positioned plumb and level. Reinstall the Integral Stops using a Socket Take care to protect surrounding area when thread seal tape to the lower outlet port and Remove Rough-In Template from Valve.
  • Page 5 3) OPEN the integral stops by turning the stop spindles counter clockwise. Turn on the hot and cold water supply valves. Check for leaks. 4) Reassemble the trim parts. SPEAKMAN CPV-TP / CPV-TP-DV REPAIR PARTS ® I I TEM #...
  • Page 6 SPEAKMAN CPV-TP ROUGH-IN DIAGRAM ® NOTES: COMPLIANCE: ASME A112.18.1/CSA B125.1 1" 25mm Shower Valve ASSE1016 HOLE FOR SHOWER ARM 6'-6" [2 METERS] TO FLOOR CONNECTIONS: 5-1/2" (140MM) DIA. 1/2" NPT MALE Hot/Cold Inlets: ½” Female Copper Sweat HOLE FOR 1/2" SWEAT VALVE ACCESS ½”...
  • Page 7 Cover your drain to prevent loss of parts. Be sure to wear eye protection while cutting pipe. MAINTENANCE Your new Speakman Product is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. The use of harsh...
  • Page 8 Temporarily place Handle over splines and adjust the valve to the OFF position (as per the Valve Instructions). Then, align Handle vertically as shown below. Secure Handle to Spindle with the included #8 Screw. SPEAKMAN CPT-5001 / CPT-5401 REPAIR PARTS ® ITEM NO.
  • Page 9 SPEAKMAN CPT-5001 ROUGH-IN DIAGRAM ® 1" 25mm HOLE FOR SHOWER ARM 6'-6" [2 METERS] TO FLOOR 7.50in 191mm 5-1/2" (140MM) DIA. 4.31in 1/2" NPT MALE HOLE FOR 110mm 1/2" SWEAT VALVE ACCESS CONNECTION 1/2" NPT MALE 1/2" NPT MALE 1/2" SWEAT 1/2"...
  • Page 10: Rough-In Dimensions

    Pipe Fitting within the wall. Firmly tighten, 1/2" NPT THREADS BOTH ENDS and make sure Shower Arm (2) Outlet is For additional assistance or service please contact: pointing in a downward position. 45.00° " SPEAKMAN INLET ® Company 42mm " 21mm 400 Anchor Mill Road New Castle, DE 19720 7"...
  • Page 11: Operation

    MAINTENANCE The finish of your SPEAKMAN VERSATILE® hand held shower and all the other components can be cleaned by using mild soap and warm water. Dry immediately with a soft, clean cloth for best results. The flow control device limits water flow to 2.5 gallons per minute, and is in the base of the handheld.
  • Page 12 SPEAKMAN ® 400 Anchor Mill Rd. New Castle, DE 19720 Phone: 800-537-2107 Fax: 800-977-2747 9/08/17 www.speakman.com 92-2681-02...
  • Page 13: Tools And Supplies

    ½ hour then rinse thoroughly. Brush off any remaining mineral deposits if necessary. DO NOT USE the vinegar/water treatment on any finish other than Chrome. For additional assistance or service please contact: SPEAKMAN ® Company 400 Anchor Mill Road New Castle, DE 19720...
  • Page 14 ROUGH IN DIMENSIONS 50 RUBBER TIPPED SPRAYS " 79.38 " 215.90 PAUSE BUTTON 1/2-14 NPSM MALE THREADED INLET 1" 25.40mm .714in 18.14mm " ACROSS 10.16mm FLATS FLOW CONTROL INSERTED INTO HANDLE " 30.18 VS-100-PC Max. Flow Rate: 2.5 gpm (9.5L/min) Min.
  • Page 15 MAINTENANCE Your new Speakman Product is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. The use of harsh chemicals and abrasives on any of the Speakman custom finish products may damage the finish and void the product warranty.
  • Page 16 Mounting Bracket. 1/4 turn clockwise to lock into the desired position. LOCK UNLOCK NOTE: Upper mounting hole is intentionally off center to allow for easier installation. SPEAKMAN SPEAKMAN VS-153-ADA ROUGH-IN DIAGRAM ® VS-153-ADA-30 / VS-153-30-RT ROUGH-IN DIAGRAM ® NOTES: NOTES: 1.34in 1.34in...
  • Page 17 SPEAKMAN SPEAKMAN VS-153-ADA REPAIR PARTS VS-153-ADA-36 ROUGH-IN DIAGRAM ® ® NOTES: 1.34in 33.91mm COMPLIANCE: ADA COMPLIANT 50.80mm TYP. • Meets the ANSI standard 250 lbs. pull-test for grab bars and ADA lever handle for adjusting slide bar. 2.78in • The VS-153-ADA Slide Bar meets ADA pull force 70.73mm...

This manual is also suitable for:

Sentinelpro combination series

Table of Contents