urmet domus 1736 Manual

DS110-084
Para el manual completo de este dispositivo, escanea el código QR
Para o manual completo deste dispositivo, faça o scan do código QR
Für das vollständige Handbuch dieses Geräts scannen Sie den QR-Code
Για το πλήρες εγχειρίδιο αυτής της συσκευής, σαρώστε τον κωδικό QR
Për manualin e plotë të kësaj pajisjeje, skanoni kodin QR
ENGLISH
GENERAL WARNINGS
Read carefully the warnings and notes contained in this document, as they provide important information regarding the safe
installation, use and maintenance of the equipment.
This device must only be used for the purpose for which it was expressly designed. Any other use is considered
•
improper. The manufacturer cannot be held responsible for any damage resulting from improper, incorrect, or
unreasonable use.
The system must be built and executed in compliance with the regulations in force. All devices in the system must be
•
exclusively used for the purpose for which they were designed.
Provide a suitable isolation, cut-off, and protection master switch upstream of the devices, with a contact opening
•
distance of at least 3 mm.
Before connecting the equipment, ensure that the plate data corresponds to the specifications of the distribution network
•
or mains power supply.
After removing the devices from the packaging, check their integrity. Keep packaging materials (plastic bags, expanded
•
polystyrene, etc.) out of the reach of children, as they are potential sources of danger.
• Do not block the ventilation or heat exhaust openings or slots. Keep all cooling or ventilation openings free at all times.
• Do not install the equipment in environments exposed to rain, water, or humidity. In such cases, use specific protective
enclosures or boxes.
Disconnect the device from the electrical mains by turning off the system switch before carrying out any cleaning or
•
maintenance operations.
In case of failure and/or malfunction of the device, disconnect the power using the main switch or circuit breaker and do
•
not tamper with the equipment.
In the event of infiltration of liquids or foreign objects inside the device, or for any repairs, contact exclusively a service
•
centre authorised by the manufacturer.
• Do not use extension cables for the power supply connection.
• Installers must ensure that user information, including this manual, is present on all connected devices and remains
available at all times.
Failure to comply with the above warnings may compromise the safety of the device and the system.
•
INSTALLATION PRECAUTIONS
This kit must be powered using the specific power supply provided in the kit.
Position the components on vertical and smooth supports, respecting all instructions provided in this manual and in the
documentation available on the website www.urmet.com.
CLEANING OF PARTS
Use a soft cloth to remove dust and dirt.
•
Do not use aggressive cleaning liquids (such as petrol, solvents, etc.) which could cause corrosion.
•
Do not use spray products for cleaning the device.
•
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept all interference received, including interference that may cause undesired operation.
15.105 Information to the user statements:
‫اﻟﺟﮭﺎز، ﻗم ﺑﻣﺳﺢ رﻣز اﻻﺳﺗﺟﺎﺑﺔ اﻟﺳرﯾﻌﺔ ﺿوﺋ ﯾ ً ﺎ‬ ‫ﻟﻠﺣﺻول ﻋﻠﻰ اﻟدﻟﯾل اﻟﻛﺎﻣل ﻟﮭذا‬
Mod.
1736
LBT21814