EKKO EB13CD Operation & Maintenance Manual

Fork over stacker

Advertisement

Operations & Maintenance Manual
Fork Over Stacker
EB13CD

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EB13CD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for EKKO EB13CD

  • Page 1 Operations & Maintenance Manual Fork Over Stacker EB13CD...
  • Page 2: Special Warning

    01. Instructions for use Please read this manual carefully and operate the vehicle safety. • Do not operate this vehicle without training. • Please comply with ISO3691 “Safety Specification for Motor Vehicles Industry”. • Please do not modify or change the repair parameters, including adjusting the pressure. Any loss or damage to the vehicle resulting from such actions will be your responsibility, and doing so will void our warranty commitment.
  • Page 3: Main Technical Parameters

    02. Main technical parameters Item no. Description Item no. Description Fork Handle Loading wheel Drive wheel Inner mast Balance wheel Outer mast Battery Oil pump Emergency button Protect mesh ~ 2 ~...
  • Page 4: External Drawing

    03. External drawing ~ 3 ~...
  • Page 5 EB13CD Model Drive type Battery Operation type Walkie Rated capacity Q(lbs.) 2800 c(in) Load center Service weight lbs. Wheels material Max. lift height h3(in) Lowered mast height h1(in) 82.2 Extended mast height h4(in) 139.4 Lowered fork height h13(in) 3.54 Overall length l1(in) 67.7...
  • Page 6 04. Operation Guide The correct use and operation of the vehicle will bring great convenience to your work. Incorrect operation or improper use of the vehicle may result in damage to the vehicle, as well as posing a risk to your personal safety and cargo. Before use, please ensure the vehicle is in normal working condition by checking the following: whether the hydraulic pipeline is leaking oil, whether the wheels of each group can be intact and normal, and whether there is a stuck phenomenon.
  • Page 7 Horn Reverse switch Lift up down. Magnetic suction key The red button at the top of the accelerator is an emergency reverse switch. When this switch is touched, the vehicle will reverse the reverse motion. Up, down switch and horn button The lift button is located on the right side above the rudder handle.
  • Page 8 Electricity meter, only after the power switch and magnetic key are turned on, the unit will show the power storage status, it is displayed by four indicator lights. a. When the indicator of the meter is displayed on the left, it indicates that the power supply is sufficient for normal us.
  • Page 9 Charging jack The charging port is located in the throat of the vehicle, as shown in Figure 2-6, and the charging port is related to the charger placed on the vehicle: a. Built-in charger, the vehicle comes with its own charger, the charging port is a three-core socket, and the power cord can be connected to any conventional wall outlet.
  • Page 10 05. Warning logo and name plate explanation ~ 9 ~...
  • Page 11 ~ 10 ~...
  • Page 12 Figure5-1 Do not stand in dangerous areas under the forks Figure5-2 No one is allowed to stand on the forks Figure5-3 Hoisting holes Figure5-4 Avoid all movable parts. Movable parts can cut or squeeze hands, feet, arms, or legs. Figure 5-5 Charging flag Figure5-6 Indicator of the meter Figure5-7 Forklift operation Figure5-8 Stacking bulk cargo is strictly prohibited...
  • Page 13 Tip: 1. If the battery is faulty, please call the official customer service to make an appointment for maintenance. If you remove the battery without permission, it may cause the battery to leak, heat, smoke, and seriously lead to fire or explosion. 2.
  • Page 14: Troubleshooting

    discharging at least once a month. If the power is less than 20% or more than 90% for a long time, it will lead to irreversible power attenuation of the battery in the future. 9. Please avoid storing the battery in places at risk of falling, so as to avoid falling resulting in battery leakage, heat, and serious fire or explosion Troubleshooting Fault...
  • Page 15 Periodic maintenance inspection We recommend that you do your first maintenance for one month after purchasing your vehicle, followed by regular maintenance checks every six months. Daily maintenance check If you find anomalies during the inspection and maintenance process, please call the official customer service hotline to make an appointment with the authorized service center of the forklift truck for inspection.
  • Page 16 2. If you need to repair or replace the electric vehicle and its parts in the process of using the vehicle, please keep the corresponding after-sales service card after repair or replacement. Warranty policy 1. We will provide you with 12 months of vehicle core components warranty (core components including accelerator, controller, frame), gear box, motor, cylinder warranty for half a year, other parts warranty.
  • Page 17: Hydraulic Schematic Diagram

    9. Hydraulic schematic diagram ~ 16 ~...
  • Page 18 10. Electrical schematic diagram ~ 17 ~...

Table of Contents