METHVEN WAIPORI ULTRA SHOWER MIXER Installation Manual

Download this manual

Care and Cleaning:

Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with

contamination free warm soapy water and a damp soft cloth.

Methven warrants this product against manufacturing defects and that it is suitable for use

under the general operating conditions specified in this instruction sheet. However, regional

regulations apply and may a°ect y our warranty. Please refer to www.methven.com or call

customer service for full details.

New Zealand

0800 804 222

Australia

13 14 16

08001 95 1602

WAIPORI ULTRA SHOWER MIXER

INSTALLATION GUIDE

TECHNICAL SPECIFICATIONS

Operating Pressure:

Min 15okPa, Max 10ookPa.

Recommended 150-sookPa.

Recommended installation of a pressure

limiting valve if supply exceeds sookPa.

Operating Temperature:

Hot: Min 50"C (at mixer), Max 7o"C.

Cold: Min s"C.

AS/NZS 3500 requires all hot water

supplies to any

sanitary fitting to be tempered to 50°C

Inlet Connections:

All½" BSP .

Issue A

Need help?

Do you have a question about the WAIPORI ULTRA SHOWER MIXER and is the answer not in the manual?

Page 1 Never use abrasives or abrasive cleaning agents to clean this product. Clean regularly with contamination free warm soapy water and a damp soft cloth. Methven warrants this product against manufacturing defects and that it is suitable for use under the general operating conditions specified in this instruction sheet. However, regional regulations apply and may a°ect y our warranty.
Page 2 Installation IMPORTANT Please read all of the instructions before installation • Remove protection caps from the mixer body and make sure the external surface of the mixer body is clean. Avoid restrictive piping, fittings or sharp angled bends when plumbing the mixer. •...