Table of Contents
Advertisement
NM-MODEYE
B/W
Color
The MODCAM is a self contained camera and modulator that converts the video signal to a selected television channel. It is
powered over the same coax cable that returns the video broadcast signal for One Wire Video™ installation. It mounts in a
round 2.7 inch diameter hole and is viewed with a television tuner. Equipment that does not have a tuner, such as a security
monitor, Quad display, or DVR, will require a demodulator (any TV tuner device with a composite video output such as a
VCR) to convert the video for its use.
Product Includes:
1. Camera Assembly (Camera Eyeball, Modulator, Interior Base,
Exterior Ring, Mounting Ring, Video/Power Connector).
2. Power Injector and 12V DC 300mA Power Transformer, Center Conductor Positive.
3. Mounting hardware (Mounting Screws, Grounding Strap, Grounding Screw).
Camera Assembly
Available in choice of colors:
B/W camera
Color camera
Day/Night Color Housing
NM-MODEYE-BW
NM-MODEYE-CW
NM-MODEYE-HW
NM-MODEYE-BN
NM-MODEYE-HN
NM-MODEYE-CN
Interior Base
Installs in round
2.7" dia. x 2.5" deep hole.
Mounting Ring
Not Shown - Secures internal
base to mounting surface.
Video/Power Connector
Power and video share one coax
through female F connector.
FEATURES
Camera and modulator in one assembly
One Wire Video™ installation
Combines with existing TV channels
Viewable on multiple televisions
Excellent image quality
Tough billet aluminum housing
Internally routed cables
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply and power injector
1 year limited warranty
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
Day/Night
Color
White
Nickel
CAMERA BACK
SPECIFICATIONS
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Modulation Method:
Output Channel:
Output Level:
Output Connector:
Cable Type:
Power Requirement:
Power Connector:
Assembly Size:
Exterior Size:
Hole Size:
Mounting Holes:
Weight:
Modulated Camera
Indoor Low Profile Eyeball
B/W
3.6mm
1/3" CCD
350 lines
72˚ Horizontal
54˚ Horizontal
0.7 Lux F2.0
0.5 Lux F1.2
Yes
Digital Crystal PLL
UHF 14-69, CABLE 70-94, 100-125
+30dBmV
Female F, 75 Ohm
RG59, RG6 or better
12V DC, 300mA
5.5mm OD, 2.1mm ID, center positive
4.6" dia. x 3" long
4.6" dia. x 1.5" high
2.65" dia. x 2.5" deep
3.5" centers
Camera Eyeball
Adjust for desired
field of view
Modulator
Not Shown - Switch
bank sets output channel:
UHF 14-69
CABLE 70-94, 100-125.
Camera Lens
Comes prefocused from
factory but can be adjusted
by rotating in either direction.
Exterior Ring
Covers mounting ring
and secures camera
eyeball position.
Color
Day/Nght Color
3.7mm
3.6mm
1/4" CCD
1/3" CCD
470 lines
470 lines
72˚ Horizontal
0.3 Lux F1.2
No
Yes
1 lb.
(subject to change without notice)
MAN-MODEYE
REV0612A
Advertisement
Table of Contents
