Table of Contents
Advertisement
NM-UTPBALL
B/W
Color
This general purpose surveillance camera utilizes a built-on NetMedia UTP Video Encoder and external UTP Video Decoder
to exchange power and video across Unshielded Twisted Pair (UTP) cable, such as CAT5. There is no need to run multiple
cables to the camera location! It mounts to a typical rectangular junction box and is viewed with a security monitor or
television. To view the camera on a single standard television, use the TV's composite RCA Video Input jack.
Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base Plate, UTP Video Encoder, UTP Jack).
2. NetMedia UTP Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.
UTP Video Encoder
Not shown - Built into camera, it
exchanges power and video with Decoder
for One Wire Video™ on UTP cable.
Locking Ring
Secures elbow bracket to Base
Plate at desired position.
Base Plate
Supports UTP Encoder and cable.
Mount to rectangular junction box.
UTP Jack
Connects to Camera UTP
Jack via straight-through
wired UTP cable (T-568A).
Power Input
Connects to 24V DC wall
transformer (included)
and AC outlet.
FEATURES
UTP Video Encoder built into camera
Includes UTP Video Decoder module
One Wire Video™ Installation
Uses one inexpensive UTP cable
Supports up to 1000 ft of UTP cable
Supports industry standard wiring schemes
Excellent image quality
Tough billet aluminum housing
Internally routed cables
Mounts to standard electrical fixtures
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
UTP Security Camera
Day/Night
Color
UTP Video Decoder
SPECIFICATIONS
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:
Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
UTP Decoder Video Output:
UTP Decoder Video Output Connector:
UTP Decoder Power Input:
UTP Decoder Power Connector:
UTP Decoder Size:
UTP Decoder Weight:
Housing Size:
Base Size:
Base Mounting Holes:
Assembly Weight:
Indoor Ball Camera
Available in UV Paintable White
B/W camera
Color camera
NM-UTPBALL-BW
NM-UTPBALL-CW
Adjusts camera angle at base,
Female RJ-45 connector transmits
both power and video across CAT5
Red LED
Indicates Power.
RCA Video Out
Connects to viewing
device such as monitor,
DVR, TV, or modulator.
B/W
Color
3.6mm
3.7mm
1/3" CCD
1/4" CCD
350 lines
470 lines
72˚ Horizontal
54˚ Horizontal
0.7 Lux F2.0
0.5 Lux F1.2
Yes
Female RJ-45 jack
UTP: CAT5 or better
Up to 1000'
Proprietary
Composite
Female RCA
24V DC, 200mA
5.5mm OD, 2.1mm ID, center positive
3.2" long, 2.2" wide, 0.9" thick
3 oz.
2.33" dia.
4.5" long, 2.75" wide
3.25" centers
14 oz.
Camera Assembly
Day/Night Color Housing
NM-UTPBALL-HW
White
Elbow Bracket
screw, and housing.
Housing Cap
Remove to adjust focus.
Camera Lens
Factory set - rotates in either
direction to adjust focus.
UTP Jack
and other UTP cable types.
Day/Night Color
3.6mm
1/3" CCD
470 lines
72˚ Horizontal
0.3 Lux F1.2
No
Yes
(subject to change without notice)
MAN-UTPBALL
REV0703A
Advertisement
Table of Contents
