Net Media MM73 User Manual page 105

SCE3-IR
Day/Night Color with IR LED's
This day/night color security camera with built-in infrared (IR) LED's mounts to a typical round 4 inch junction box and is
viewed with a security monitor. IR illumination provides invisible light for the camera in complete darkness. Other base plates
with a 1/2 inch diameter hole for the elbow bracket may be used instead. To view the camera on a single standard television,
use the TV's composite RCA Video Input jack.
Product Includes:
1. Camera Assembly (Camera, IR LED's, Light Sensor, Housing, Housing Cap,
Elbow Bracket, Locking Ring, Base, Gasket, Video Connector; Power Connector).
2. 12V DC 300mA Power Transformer, Center Conductor Positive.
3. Mounting hardware (Mounting Screws, Grounding
Strap, Screw and Compression Ring).
Housing
Available in Ivory only:
Model Camera Type
SCE3-IR Day/Night Color
Housing Cap
Remove to rotate camera
bracket or to adjust focus.
Elbow Bracket
Adjusts camera angle at base,
screw, and housing. Installs in
1/2" junction box covers.
Locking Ring
Secures elbow bracket to
base at desired position.
FEATURES
Excellent image quality
Sees in complete darkess
No visible red glow
IR LED's turn on/off automatically
Tough aluminum housing
Weather resistant enclosure
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
Video Connector
Female BNC connector.
SPECIFICATIONS
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Infrared Illuminators:
Output Connector:
Power Requirement:
Power Connector:
Housing Size:
Base Size:
Mounting Holes:
Weight:
Security Video Camera
Indoor/Outdoor Weather Resistant
Camera Lens
Comes prefocused from
factory but can be adjusted
by rotating in either direction.
Infrared LED's
940nm IR illuminators
provide invisible light for
camera without red glow.
Light Sensor
Automatically turns LED's on
and off according to light level.
Gasket, Base & Screws
Mount to round 4" junction box.
Power Connector
12V DC 300mA, center positive.
Day/Night Color
3.6mm
1/3" CCD
470 lines
72˚ Horizontal
0.3 Lux F1.2
Yes
28 940nm IR LED's
Female BNC, 75 Ohm
12V DC, 300mA
5.5mm OD, 2.1mm ID, center positive
3.13" dia., 4" long
4.5" dia., 0.75" high, 0.5" hole
3.5" centers
1 lb.
(subject to change without notice)
MAN-SCE3-IR REV0703A