Table of Contents
Advertisement
NM-POCLAMP
B/W
Color
This general purpose surveillance camera utilizes a built-in NetMedia Power over Coax (PoC) Video Encoder and external
PoC Video Decoder to exchange power and video across a single coax cable, such as RG6. There is no need to run multiple
cables to the camera location! It mounts to a typical round 4 inch junction box and is viewed with a security monitor or
television. To view the camera on a single standard television, use the TV's composite RCA Video Input jack.
Product Includes:
1. Camera Assembly (Camera, Housing, Housing Cap, Elbow Bracket,
Locking Ring, Base, Gasket, PoC Video Encoder, F-Connector).
2. NetMedia PoC Video Decoder and 24V DC 200mA Power Transformer.
3. Mounting Screws and RCA Video Cable.
Housing
Available in Ivory Color Only:
B/W camera
Color camera
Day/Night Color Housing
NM-POCLAMP-B
NM-POCLAMP-H
NM-POCLAMP-C
Elbow Bracket
Adjusts camera angle at base,
screw, and housing.
F-Connector
Transmits both power and video
across a single coax.
F-Connector
Connects to camera
F-Connector with a single
coax such as RG6.
Power Input
Connects to 24V DC wall
transformer (included)
and AC outlet.
FEATURES
PoC Video Encoder built into camera
Includes PoC Video Decoder module
One Wire Video™ Installation
Uses one coax cable to camera
Excellent image quality
Internally routed cables
Mounts to standard electrical fixtures
Mounts directly to walls and ceilings
Works in low light conditions
Adjustable camera angles
Tamper resistant wiring
Includes power supply
1 year limited warranty
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
Power over Coax Camera
Indoor/Outdoor Weather Resistant
Day/Night
Color
Ivory
PoC Video Decoder (Included)
SPECIFICATIONS
Camera Lens:
Image Sensor:
Resolution:
Field of View:
Min Illumination:
Infrared Sensitivity:
Camera/Decoder Cable Connector:
Camera/Decoder Cable Type:
Camera/Decoder Cable Distance Range:
Camera/Decoder Video Signal:
PoC Decoder Video Output:
PoC Decoder Video Output Connector:
PoC Decoder Power Input:
PoC Decoder Power Connector:
PoC Decoder Size:
PoC Decoder Weight:
Housing Size:
Base Size:
Base Mounting Holes:
Assembly Weight:
PoC Video Encoder
Built into camera - exchanges
power and video with Decoder for
One Wire Video™ on coax cable.
Factory set - rotates in either
direction to adjust focus.
Slot indicates image bottom.
Provides access to camera.
Base, Gasket & Screws
Mount to round 4" junction box.
Secures elbow bracket to
base at desired position.
RCA Video Out
Connects to viewing
device such as monitor,
DVR, TV, or modulator.
B/W
Color
3.6mm
3.7mm
1/3" CCD
1/4" CCD
350 lines
470 lines
72˚ Horizontal
54˚ Horizontal
0.7 Lux F2.0
0.5 Lux F1.2
Yes
No
Female F-Connector
Coax: RG6 quad shield recommended
Up to 100'
Proprietary
Composite
Female RCA
24V DC, 200mA
5.5mm OD, 2.1mm ID, center positive
3.2" long, 2.2" wide, 0.9" thick
3 oz.
3.13" dia. x 4" long
4.5" dia., 0.75" high, 0.5" hole
3.5" centers
1 lb.
(subject to change without notice)
Camera Lens
Camera Bracket
Housing Cap
Locking Ring
Day/Night Color
3.6mm
1/3" CCD
470 lines
72˚ Horizontal
0.3 Lux F1.2
Yes
MAN-POCLAMP
REV0703A
Advertisement
Table of Contents
