Installation Procedures - Net Media MM73 User Manual

NM-POCSET

Installation Procedures:

1. Connect a coax cable (RG6 recommended) to the F-Connectors of the Video Encoder and Decoder. Each
Encoder/Decoder pair needs a dedicated point-to-point wiring circuit. Do not connect the Encoder/Decoder coax
to other video distribution equipment! Doing so could damage this product and/or the other attached devices!
2. Connect a video cable from the camera to the Encoder's RCA Video In jack. Simple adapters, such as RCA to BNC, may
be used where appropriate.
3. Connect the Power Extension Cable from the Encoder's Power Output Connector to the camera's 12V DC power input.
If the camera requires more than 150mA or if it does not use 12V DC then it cannot use the Encoder's power output.
4. Connect a video cable from the viewing device (monitor, Quad, DVR, modulator, etc.) to the Decoder's RCA Video Out
jack using appropriate adapters where necessary.
5. Connect the 24V DC 200mA Power Transformer from an AC outlet to the Decoder's Power Input Connector.
Video Cable
Camera Camera
Figure 1 - Connecting the modules to a security monitor or standard television. Use the TV's composite RCA Video
In jack and view through its video or line input. The picture will not be available on a channel.
Camera Camera
PoC Video Encoder Module
Figure 2 - Connecting the modules to multiple pieces of video equipment. Every piece except the last must have a
loopback or video output jack.
12 VDC
Camera Camera
PoC Video Encoder Module
Main cable or
antenna
Figure 3 - Connecting the modules to a modulator for whole house distribution and standard television viewing
on the modulated channel. The modulator can also be the last piece of equipment in Figure 2.
NetMedia, Inc., 10940 N. Stallard Place, Tucson, Arizona 85737 (520) 544-4567 Fax: (520) 544-0800 Email: sales@netmedia.com www.netmedia.com
12 VDC
OUTPUT
PoC Video Encoder Module
12 VDC
Coax Cable
OUTPUT
POWER
VIDEO
Coax Cable
OUTPUT
POWER
VIDEO
PoC Video Decoder Module
Up to 100 Feet
Coax Cable
POWER
VIDEO
PoC Video Decoder Module
Sequencer
24 VDC
INPUT
PoC Video Decoder Module
Modulator
24 VDC
INPUT
Amplifier
24 VDC
Video Cable
INPUT
Quad
or
DVR
Monitor
or
Video Cable
Television
Distribution Panel
or Splitter
Splitter/
Combiner
Monitor
or
Television
To Next
Device
Television
Television
MAN-POCSET REV0703A