When you take a look at these indicators, you will know what's
happening on your network.
Name
Status Indication
On
PWR
Off
On
FX LINK
Off
On
LINK
Off
TP
On
RX
Off
Note:
The TP port mentioned in this User Guide Manual stands for the TX port
without any explanations.
3.2
Switch
FORCE: The FX port operates in FORCE mode.
PWR
LINK
FX
TP
Power on
Power off
There's a valid link for FX Port.
There's no valid link for FX Port.
There's a valid link for TP Port.
There's no valid link for TP Port.
The converter is receiving data from TP port.
The converter is not receiving data from TP
port.
Force
4
RX
LINK
AUTO
Need help?
Do you have a question about the MC200CM and is the answer not in the manual?