Monitoring The Ipsec Vpn Tunnels - Cisco WRV210 - Wireless-G VPN Router Administration Manual

Configuring a Virtual Private Network (VPN)

Monitoring the IPSec VPN Tunnels

Monitoring the IPSec VPN Tunnels
Cisco Small Business WRV210 Administration Guide
Use the VPN Summary page to review the settings and monitor the status of all
IPSec tunnels. You also can stop, start, or restart a connection.
To open this page, click VPN > VPN Summary in the navigation tree. Refer to the
following descriptions of the fields and buttons:
• Tunnel Name: The field displays the name of the tunnel.
• Remote Gateway: The field displays the remote gateway. If the pre-
configured type is IP Addr., the field displays the IP address of remote
gateway. If the pre-configured type of remote gateway is Any, the field
displays ANY. If the pre-configured type is FQDN, the filed displays the
FQDN string directly.
• Remote Group: The field displays the remote peer that is designated for
VPN communication after a IPSec VPN tunnel is established. If the pre-
configured type of the remote group is IP Addr., the field displays the IP
address of the remote peer. If the pre-configured type of the remote group
is Subnet, the field displays the subnet type "IP Address/Mask". If the pre-
5
73