Cisco WRV210 - Wireless-G VPN Router Administration Manual page 56

Configuring the Firewall
Configuring a DMZ to Allow Access to All Ports of a Server
STEP 1
STEP 2
STEP 3
STEP 4
Cisco Small Business WRV210 Administration Guide
Click Firewall > DMZ in the navigation tree.
In the Software DMZ, click Enabled.
You can disable a DMZ at any time by clicking Disabled and saving the
NOTE
settings.
Enter the IP address of the PC that hosts the service that you want to expose to
Internet traffic.
Click Save to save your settings, or click Cancel to refresh the page with the
previously saved settings.
4
56