Cisco WRV210 - Wireless-G VPN Router Administration Manual page 21

Setting Up the Network
Configuring the Basic Settings
Cisco Small Business WRV210 Administration Guide
- User Name and Password/Confirm Password: Enter the User Name
and the Password provided by your ISP. Then, enter the password again
to confirm it.
- Service Name: If your service provider has given you this information,
enter it in this field. If you are not sure if your service provider requires
this information, or if you do not know the service name, leave this field
blank.
- Connect on Demand and Max Idle Time: You can configure the Router
to disconnect the Internet connection after it has been inactive for a
specified period of time (Max Idle Time). The Router automatically re-
establishes the connection when a user attempts to access the Internet
again. If you select this option, specify the Max Idle Time by entering the
number of seconds of inactivity that can elapse before the Internet
connection is terminated automatically.
- Keep Alive: Select this option to enable the Router to periodically check
your Internet connection. If you are disconnected, then the Router
automatically re-establishes your connection.
• PPTP: Point-to-Point Tunneling Protocol (PPTP) is a service that applies to
connections in Europe and Israel. Enter the following information, as provided
by your ISP:
- IP Address: Enter the IP address that your ISP provided to you.
- Subnet Mask: Enter the Router's Subnet Mask, as seen by external
users on the Internet (including your ISP).
- Default Gateway: Enter the Default Gateway Address, which is the ISP
server's IP address.
- PPTP Server IP: Enter the IP address of the ISP's PPTP server.
- User Name and Password: Enter the User Name and Password
provided by your ISP.
- Connect on Demand and Max Idle Time: You can configure the Router
to disconnect the Internet connection after it has been inactive for a
specified period of time (Max Idle Time). The Router automatically re-
establishes the connection when a user attempts to access the Internet
again. If you select this option, specify the Max Idle Time by entering the
number of seconds of inactivity that can elapse before the Internet
connection is terminated automatically.
2
21