Advertisement
Quick Links
W294
Manual, plastic vertical uncapper -
module, 1/2 Dadant
USER MANUAL
Przedsiębiorstwo Pszczelarskie Łysoń Sp.
z o.o. Ul. Pszczela 2, Klecza Dolna, 34-
124 Klecza Górna NIP: 551-260-51-86
tel. +48 33 857-99-40, +48 33 875-93-24, + 48 33 844-75-21,
www.lyson.com.pl
, e-mail:
lyson@lyson.com.pl
Advertisement
Related Manuals for LYSON Dadant W294
Summary of Contents for LYSON Dadant W294
- Page 1 Manual, plastic vertical uncapper - module, 1/2 Dadant USER MANUAL Przedsiębiorstwo Pszczelarskie Łysoń Sp. z o.o. Ul. Pszczela 2, Klecza Dolna, 34- 124 Klecza Górna NIP: 551-260-51-86 tel. +48 33 857-99-40, +48 33 875-93-24, + 48 33 844-75-21, www.lyson.com.pl , e-mail: lyson@lyson.com.pl...
- Page 2 SHORT DESCRIPTION: The machine for honeycomb cutting and board printing is a manual device, which facilitates the beekeeper’s work during the course of the primary yield of honey. It is compatible with different standards for shop honeycombs, featuring height up to 160 mm. It operates, while applying the principle of the printing-out fork, as it takes away by 3 mm from both sides of the surface layer below the level of the frame.
- Page 3 After taking the body out of the box, you have to montage the handle (3) on left or the right side using bolt №4 (M6x16). You will find it in the plastic bag. To montage the pusher, first you would have to dismantle piece №5 via two fasteners №8 (M8x12), place it as shown in the picture, then montage piece №5 again.
Need help?
Do you have a question about the Dadant W294 and is the answer not in the manual?
Questions and answers