LYSON W3207 Manual

LYSON W3207 Manual

Honey decrystallization coil with temperature regulator

Advertisement

Quick Links

MANUAL
HONEY DECRYSTALLIZATION COIL
WITH TEMPERATURE REGULATOR
Przedsiębiorstwo Pszczelarskie Tomasz Łysoń
Spółka z o.o. Spółka Komandytowa
34-125 Sułkowice, ul. Racławicka 162, Polska
www.lyson.com.pl, email; lyson@lyson.com.pl
tel. 33/875-99-40, 33/870-64-02
Company based in: Klecza Dolna 148, 34-124 Klecza Górna
2017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W3207 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for LYSON W3207

  • Page 1 MANUAL HONEY DECRYSTALLIZATION COIL WITH TEMPERATURE REGULATOR Przedsiębiorstwo Pszczelarskie Tomasz Łysoń Spółka z o.o. Spółka Komandytowa 34-125 Sułkowice, ul. Racławicka 162, Polska www.lyson.com.pl, email; lyson@lyson.com.pl tel. 33/875-99-40, 33/870-64-02 Company based in: Klecza Dolna 148, 34-124 Klecza Górna 2017...
  • Page 2 The following manual covers the devices bearing the following codes: W3207 , W3208 , W3210 Manual General principles for usage safety. 1.1. Electrical safety 1.2. Usage safety Characteristics for the decrystallization device. 2.1.Decrystallization. 2.2.Technical parameters of the device Temperature regulator 3.1.
  • Page 3 DECRYSTALLIZATION DEVICES WITH A 2. Characteristics for the decrystallization device TEMPERATURE REGULATOR The coil shall be placed on top of the tank in which the POWER SUPPLY 230V crystallised honey has placed. Connect the device to the mains and set the temperature Prior to operating the device please refer to the manual and regulator (initially max .
  • Page 4 3 – display 3. TEMPERATURE REGULATOR Working mode – default mode, selected after controller The device has been equipped with HC-01 temperature power supply switched on. The display shows the measured regulator temperature, readings specified in Setting mode – selected when button “+” or “-“ has been pressed.
  • Page 5 Preliminary heating temperature setting mode – pressing mode, signalled by (P.tl) notice. In this mode by means of “+” and “-“ buttons the user has a possibility to define the time the button will decrease the value of preset temperature that will be maintained during preliminary heating.
  • Page 6 ERROR ERROR DESCRIPTION Outlet switching durability > 3 x 10 for 10A 230VAC (E-0) CPU Damaging the main processing STATUS unit. Maximum switching 600 cycles/h Too low temperature measured frequency AC1 (E-3) T < Tmin by T1 sensor. Too high temperature measured Environmental conditions (E-4) T >...
  • Page 7 Guarantee Product purchased from “Łysoń’ company are encompassed by the manufacturer’s guarantee. The guarantee duration equals 24 months. A receipt or a VAT invoice is issued for each product purchased. Detailed guarantee terms and conditions, see www.lyson.com.pl...

This manual is also suitable for:

W3208W3210

Table of Contents