LYSON W2091 Instruction Manual

LYSON W2091 Instruction Manual

Manual vertical uncapping machine

Advertisement

Quick Links

Instructions manual
Manual vertical uncapping machine
Przedsiębiorstwo Pszczelarskie Tomasz Łysoń
Spółka z o.o. Spółka Komandytowa
34-125 Sułkowice, ul. Racławicka 162, Polska
www.lyson.com.pl, email:
lyson@lyson.com.pl
tel.33/875-99-40, 33/870-64-02
Headquarters: Klecza Dolna 148, 34-124 Klecza Górna

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the W2091 and is the answer not in the manual?

Questions and answers

Summary of Contents for LYSON W2091

  • Page 1 Instructions manual Manual vertical uncapping machine Przedsiębiorstwo Pszczelarskie Tomasz Łysoń Spółka z o.o. Spółka Komandytowa 34-125 Sułkowice, ul. Racławicka 162, Polska www.lyson.com.pl, email: lyson@lyson.com.pl tel.33/875-99-40, 33/870-64-02 Headquarters: Klecza Dolna 148, 34-124 Klecza Górna...
  • Page 2: Table Of Contents

    The manual covers following devices (codes): W2091, W2091S Table of contents 1. General safety instructions 1.1. Intended use 1.2. Electrical safety 1.3. Operation safety 2. Instructions for use 2.1. General instructions – preparation for use 2.2. Operation instructions 3. Product description 3.1.
  • Page 3: General Safety Instructions

    inexperienced users, unless under supervision or with 1. General safety instructions instructions given by an accountable party. This device is not a toy, and shouldn’t be used as one. Before first use read the manual carefully and Children should not to play with it. follow the instructions contained therein.
  • Page 4: Instructions For Use

    2. Instructions for use 3. Product description The mechanical uncapping machine is designed to work with 230V power supply 2.1 General instructions – The blades of the machine are heated up by built in preparation for use heating elements with combined power of 1000W. The 1.
  • Page 5: Technical Specifications

    4. HC-01 controller Fig.3 3.2.Technical specifications Frame -Made of 0H18N9 acid resistant stainless steel Heated knives : -two oposing knives are heated by two built in heating elements of 500W heat output each. The temperature is controlled by the HC-01 temperature controller with the range of adjustment of 30-95°C.
  • Page 6 Setting mode - selected after pressing the “+” Operation mode - Pressing the button decreases the preset or “-” button. The display shows the set temperature value. During preheating, the possibility of temperature. Indications are shown in °C. The changing the preset temperature setting is blocked. display flashes and after a while it returns to Working time setting mode - pressing the button decreases the measured temperature (operation mode).
  • Page 7: Troubleshooting

    (E-7) Przycisk ON/ „ON/OFF” button fault 8. Warranty (or stuck) The product purchased from the Lyson Company is covered by a manufacturer's warranty. The warranty period is 24 months from the date of purchase. 5. Storage All purchased products come with receipts or VAT invoices.

This manual is also suitable for:

W2091s

Table of Contents