Original instruction manual Safety ......................2 Explanation of Signal Words ..............2 Safety instructions..................3 Intended Use ................... 6 Unintended Use ..................6 General information ..................7 Liability and Warranty ................7 Copyright Protection ................7 Declaration of Conformity ................ 7 Transport, Packaging and Storage ..............
Safety Diese Bedi enungsanlei tung besc hrei bt di e Installation, Bedi enung und Wartung des Geräts und gilt als wic htige Inform ationsquelle und N achschl agew erk. Z najom ość w szystkich zaw artyc h w ni ej wsk az ówek dotycz ącyc h bezpi ecz eńs twa i obsł ugi stanowi w arunek bez pi ecz nej i prawi dłow ej pr acy z urządz eni em. Ponadto należy przestrzeg ać odpowi ednio do mi ejsca użytk owani a urządz eni a l okal nyc h przepis ów dotycz ącyc h z apobieg ani a wy padk om oraz og ólnyc h zas ad BH P. This ins truc tion m anual is an integral part of the pro duct and m ust be kept i n the imm edi ate vici nity of the devic e for installati on, operation, m aintenanc e and cleani ng pers onnel to acc ess at all times . If the devic e is pass ed on to a thir d pers on, the operating instructions m us t al so be handed over.
Safety WARNING! The signal word WARNING warns against hazards that may lead to moderate or severe injuries or death if the hazards are not avoided. CAUTION! The signal word CAUTION warns against hazards that may lead to light or moderate injuries if the hazards are not avoided. , di e IMPORTANT! The signal word IMPORTANT indicates possible property damages,...
Page 6
Safety • Do not bend, pinch nor knot the power cord. • Always completely unwind the power cord. • Never place the appliance or other objects on the power cord. • Always take hold of the plug to disconnect the appliance from the power supply. •...
Page 7
Safety Operator’s responsibility The operator is responsible for complying with the currently applicable laws, regulations, ordinances and existing national regulations on accident prevention, environmental protection, as well as the internal operation, operating and safety instructions that apply at the respective installation site. Obligations of the operator: •...
Safety Intended Use This appliance is only intended for use described in the operating instructions, with the supplied and approved components. Any other use is considered against the intended purpose. The manufacturer shall not be liable for any damage due to unintended use. In such cases the responsible party shall only be the user/operator.
General information General information Liability and Warranty The appliance was built in accordance with the current state of the art and recognized technical safety principles. Nevertheless, during its use, there may be a threat to the health and life of the user or bystanders, or the danger of damage to the device or other assets.
Transport, Packaging and Storage Transport, Packaging and Storage Delivery Check Immediately upon reception, check the delivery for completeness and possible shipping damage. In the case of visible transport damage refuse to accept the appliance or accept it conditionally. Mark and note the scope of damage in shipping documents/consignment list of the shipping company and lodge a complaint.
Technical Data Technical Data Technical Specifications Name: Refrigerator 590LW 700907 Art. No.: Material: Steel, painted Inner material: Plastic ABS Content, in l: Useful content, in l: Gastronorm: 2/1 GN Temperature range from – to, in °C: 0 - 8 Ambient temperature, up to, in °C:...
Height-adjustable shelves: no • Appliance lockable: yes More information on the appliance is available in our website www.bartscher.com or, pursuant to the Regulation (EU) 2015/1094, in our product data base at https://energy-label.ec.europa.eu/. Enter article number for a model. Functions of the Appliance The appliance is designed for cooling and storage of suitable beverages and food products.
Technical Data List of Components of the Appliance Delivery without the contents! Fig. 1 1. ON/OFF button 2. Lock 3. Digital temperature regulator 4. Door seal 5. Door 6. Storage grille bottom (1x) 7. Feet (4x) 8. Shelves (4x) 9. Shelf guides 10.
Installation and operation Installation and operation Installation CAUTION! Incorrect installation, positioning, operation, maintenance or misuse of the appliance may lead to personal injury or property damage. Positioning and installation, as well as repairs may be performed by authorised technical service only and in compliance with the applicable national law.
Page 15
Installation and operation – Make sure that the designated escape routes are clear. – Ensure a stable position. – Allow sufficient space for work, maintenance and cleaning. – Leave the supply and exhaust air vents, if any, free. – Comply with applicable technical and building regulations. •...
Installation and operation Power supply connection • Verify if technical data of the appliance (see rating plate) correspond with the local electric power grid specification. • Connect the appliance to a single, properly grounded mains socket with protective contact. Do not connect the appliance to a multi-socket. •...
Page 17
Installation and operation Storing food in the refrigerator For your appliance to operate the best way, follow the indications below: • When inserting the food products, pay attention to free air circulation inside the appliance. • Food products or beverages should first be cooled to the suitable storage temperature.
Page 18
Installation and operation Functions of operating elements and displays LED fan indicator LED on: the fan is operating LED blinks: delay after defrosting LED defrosting process indicator LED on: defrosting in progress LED blinks: dripping in progress LED compressor indicator LED on: compressor off LED blinks: –...
Page 19
Installation and operation LED indicator of Fahrenheit scale LED on: the temperature measurement unit are degrees Fahrenheit LED ON/Standby indicator LED on: the appliance is off (Standby) Setting value increase button — manual defrosting Setting value decrease button ON/OFF / Standby switch Programming Button General information The appliance may feature the following status:...
Page 20
Installation and operation Button locking/unlocking Button locking: 1. Make sure, there is no process in progress. 2. Do not enter any data for 30 seconds: the 'Loc' message will be shown in the digital display for 1 second and the keypad will be automatically locked. When the keypad is locked, the following functions are not available: –...
Page 21
Installation and operation Manual defrosting activation 1. Make sure that the buttons are not blocked and there is no process in progress. 2. Press and keep the button pressed for 5 seconds. The defrosting is activated immediately. The defrosting LED indicator light is lit and remains on as long as the defrosting process lasts.
Cleaning and Maintenance Cleaning and Maintenance The operator must ensure that the device and its safety components are kept in good condition. Control and safety systems should be checked for their effectiveness. Maintenance, cleaning and repairs must only be carried out by suitably trained and specialised personnel.
Cleaning and Maintenance 8. Clean the door and the door seal of the appliance with a soft, damp cloth and mild cleaning agent. 9. Finally, dry thoroughly all washed surfaces. 10. Regularly remove dust and fibres from the rear wall of the appliance with a soft brush or dust brush.
Possible Malfunctions Possible Malfunctions Mögliche The table below contains descriptions of possible causes and solutions to malfunctions or errors during operation of the appliance. The works may only be performed by suitably qualified technical personnel. When malfunction cannot be removed, contact the technical service. In such a case, provide article number, model and serial number.
Page 25
Possible Malfunctions Error Possible Cause Solution The appliance is on, Food products that are too Remove hot food products but the temperature worm are placed in the from the appliance. is too high/low. appliance. Too little clearance between Provide for sufficient objects inside the appliance clearance between objects or too many objects in the...
Disposal Disposal Electrical Appliance Electric appliances are marked with this symbol. Electrical appliances must be disposed of and recycled in a correct and environmentally friendly manner. You must not dispose of electric appliances with household waste. Disconnect the appliance from the power supply and remove power cord from the appliance.
Need help?
Do you have a question about the 590LW and is the answer not in the manual?
Questions and answers