FUTABA PCM1024H Instruction Manual page 4

RECEIVER FP-R129DP
• Extremely quick response, high resolution, and
high reliability are achieved with a newly-
developed, low voltage PCM decoder.
• RF amplifier and monolithic IF amp designed
for high sensitivity.
• Dual conversion "1991"
narrow-band ceramic filter is immune to ad-
jacent band interference (cross modulation
interference, mutual modulation interference)
and spark noise.
• Fail Safe and Battery
provide greater safety and reliability.
SERVO FP-S9201
•High torque and high speed water-and dust-
proof servo with highest-quality coreless motor,
Output torque 5 kg-cm (69.5 oz.-in.). Operat-
ing speed 0.22 sec/60 .
• New indirect drive potentiometer
vibration and shock resistance and neutral
precision tremendously.
• Futaba custom 1C
torque, narrow dead
trackability. Neutral holding force is also im-
proved substantially.
design with ultra
Fail Safe functions
improves
provides high starting
band, and excellent
•Servo Hold function eliminates "glitches"
during momentary signal losses or strong inter-
ference.
• Gold-plated connector pins provide positive
contact.
• DSC System: Operation of all servos is possible
without turning on the transmitter by connect-
ing the accessory cord directly to the C termi-
nal of the receiver.
•Fiberglass reinforced
terephthalate) molded servo case is mechanical-
ly strong and invulnerable to glow fuel.
• Strong polyacetal resin, ultra precision servo
gears ensure smooth operation, positive neu-
tral, and minimal backlash.
• Fiberglass reinforced epoxy resin PC board
with thru-the-hole plating improves reliability
against shock and vibration.
• Seven special adjustable splined output arms.
PBT (polybutylene