FUTABA PCM1024H Instruction Manual page 13

Setting Instructions
1) Display the standard screen.
2) Reset the Total Timer by pressing the two RES program keys simultaneously.
3) Press the TIM key. The TIMER program screen will appear on the display. The Up Timer will be dis-
played first.
4) Select the UP (Up), DN (Down), or RYT (Rhythmic) timer mode by pressing the
program key. The example shown is for the Up Timer.
5) To set the alarm time, switch to the TIMER SET display by pressing the SET key. Move the cursor to
the timer mode to be set usinq the
Set the alarm time with the
When time and alarm setting is complete, return to the TIMER display by pressing the
6) To start the timer, press the STA program key. The program key characters
the key is pressed, the timer stops.
7) When the program key is pressed, the display returns to the standard screen.
Timer Counting Range 1. UP/DN Timers
program keys.
55min.59sec.
2. Total Timer 55 hrs. 59 min. 59 sec.
3. Rhythmic Timer 0.5 sec. to 59.9 sec. interval
cursor keys. Pressing the
[ 1 1]
key will
program key.
change to .When