Advertisement
Quick Links
PRODUCT NAME: Callista Bookcase
ITEM NUMBER: MV501
ASSEMBLED DIMENSIONS: 75"H X 34"W X 18"D
LEVELERS: Equipped with Rotary Levelers
installed under each corner/leg. If neces-
sary, adjustments may be made by carefully
lifting applicable corner and turning Leveler
clockwise/counterclockwise.
IMPORTANT
Set furniture into place and level
before anchoring to wall.
PRODUCTS ARE NOT INTENDED
FOR COMMERCIAL USE.
UPDATED: 10-9-2024
Serious or fatal crushing injuries can occur from a furniture tip-over
Prevent tipping accidents. Anchor your furniture.
REQUIRED TOOLS: Phillips Screwdriver
FULLY ASSEMBLED
Assembled Weight: 160 lbs.
Ltr.
Qty.
Hardware/Components Included
A
12
3
B
Middle
Top
C
1
D
2
FULLY REMOVING DRAWERS
Drawers feature metal glides.
First, fully open/extend Drawer
Push Lever in side rails up on one side
and down on the other while pulling drawer out
Representative
Image
To replace, align glides and push drawer in.
Customer Service: 800-367-2810
Online: www.ballarddesigns.com
WARNING
Tip-Over Hazard
ANCHORING HARDWARE INCLUDED
Shelf Supports
Shelves
Bottom
Bookcase
Wall Anchoring
(Anti-tip) Kit
See page 3
TO REMOVE
MADE IN VIETNAM
Page 1 of 3
Advertisement
Related Manuals for Ballard Designs Callista MV501
Summary of Contents for Ballard Designs Callista MV501
- Page 1 Customer Service: 800-367-2810 Online: www.ballarddesigns.com PRODUCT NAME: Callista Bookcase WARNING ITEM NUMBER: MV501 Tip-Over Hazard ASSEMBLED DIMENSIONS: 75”H X 34”W X 18”D ANCHORING HARDWARE INCLUDED Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. REQUIRED TOOLS: Phillips Screwdriver FULLY ASSEMBLED Assembled Weight: 160 lbs.
- Page 2 Assemble in location for intended use. SHELVES: Determine placement for each Shelf (B) then insert Shelf Supports (A) into corresponding pre-drilled holes. Carefully place Shelf level upon supports. NOTE: Shelves are sized differently. (smallest) Middle Bottom (largest) Cleaning and Care Periodically dust with a soft, dry cloth.
- Page 3 WALL ANCHORING HARDWARE (ANTI-TIP) Ltr. Qty. Hardware Included Large Screw Small Screw WARNING Tip-Over Hazard Bracket Serious or fatal crushing injuries can occur from a furniture tip-over Prevent tipping accidents. Anchor your furniture. Retention Belt Installation: 1. Place furniture against wall at desired location then locate and mark a Wall Stud behind unit. 2.
Need help?
Do you have a question about the Callista MV501 and is the answer not in the manual?
Questions and answers