Table of Contents
Advertisement
independently according to the wing type.
offset
The camber flaps of a 4-flap model can be
FLP)
call the setup screen shown below.
*The display screen is an example. The actual screen depends on the
model type.
according to the wing type and adjust the travel
independently.
the adjustment buttons displayed on the screen to
offset the reference point.
the switch to call the <Switch> screen, and then
(For a description of the switch selection method,
see the description at the back of this manual.)
84
<Model Menu (Airplane/Glider Functions)>
FLP 4
FLP 3
(Brake Flap)
(Brake Flap)
FLP 1
FLP 2
(Camber Flap)
(Camber Flap)
(Gr./Sngl)
(For more information, see the description
at the back of this manual.)
Advertisement
Table of Contents
