Table of Contents
Advertisement
Adjusts the camber and corrects the elevators.
[Airplane/glider, 2 ailerons or more]
elevator operation. Lifting force can be increased
at elevators up. [Airplane/glider, 2 ailerons or more]
Used to correct for attitude changes when the
Used when powerful brake operation is necessary.
[Glider, 2 ailerons or more]
be called by switch or condition selection. [Glider, 2
ailerons or more]
This is used when airbrakes are necessary when
general)
This is dedicated mixing when a GYA Series gyro is
used. [Airplane/glider, general]
RUDDER 1
Winglet
(
at Flying wing
(Chip Aileron)
ELEVATOR
(RUDDER 2)
82
<Model Menu (Airplane/Glider Functions)>
FLP 3
AIL1
(Brake Flap)
(Main Aileron)
)
AIL 3
FLP 1
(Camber Flap)
V-TAIL
RUDDER
(ELEVATOR 2)
Adjusts the elevators and rudder of V-tail models.
Adjusts the elevators and ailerons of models with
Adjusts the left and right rudders of winglet models.
The operation speed when the motor of F5B and
other EP gliders is started by switch can be set. [EP
glider, general]
This is used to correct roll maneuvers, knife edge,
etc. of stunt planes. [Airplane, general]
This selects the snap roll switch and adjusts the
steering angle of each rudder. Servo speed can
also be adjusted. [Airplane general]
This adjusts the throttles independently when using a
general]
AIR BRAKE
FLP 4
AIL 2
(Brake Flap)
(Main Aileron)
FLP 2
(Camber Flap)
(Chip Aileron)
AILEVATOR
ELEVATOR
ELEVATOR 2
(AILERON 5)
(AILERON 6)
RUDDER 2
Winglet
(
)
at Flying wing
AIL 4
Advertisement
Table of Contents
