Section Iii -Taking Care Of Your Machine; Cleaning The Bobbin Area; Cleaning The Hook Area And Feed Dog - ELNA eXperience 620 Instruction Manual

SECTION III
Taking Care of Your Machine
Your machine has been meticulously designed and
manufactured to give you a lifetime of sewing pleasure. Do
not store the machine in a high humidity area, near a heat
radiator or in direct sunlight. The machine is selflubricating,
however, the area around the bobbin and hook must be
cleaned each time the machine has had extensive use. Do
not dismantle the machine further than explained on these
pages. Clean the outside of the machine with a soft cloth
and pure soap.

Cleaning the Bobbin Area

Loose threads and dust may cause puckered stitches
and thread breakage during stitching. Check for lint
buildup after each project is completed.
P r e s s t h e " U p / D o w n N e e d l e " k e y u n t i l t h e n e e d l e i s r a i s e d .
Turn off power switch. Unplug the machine before
cleaning.
 Slide the bobbin cover plate release button to the
right to remove the bobbin cover plate.
 Take out the bobbin; brush out dust and lint. (You
can also use a small vacuum cleaner.)
 Insert the bobbin and attach the bobbin cover plate.

Cleaning the Hook Area and Feed Dog

 Remove the presser foot, bobbin cover plate, needle
and bobbin. Use the screwdriver supplied with the
machine to remove the screw on the left side of needle
plate.
 Remove the needle plate. Lift up and remove the
bobbin case.
25