Wacom PENPARTNER - ANNEXE 474 User Manual page 32

SIMULATING MOUSE BUTTONS
You can set the side switch on the UltraPen to simulate mouse button functions.
To simulate mouse buttons:
1. In the PenPartner control panel, open the side switch function pull-down menu.
2. Select a click option from the menu. Your changes take effect immediately.
For Windows: Select Left Click, Left Double
Click, Left Click Lock, Right Click, or Middle
Click.
For Macintosh: Select Click, Double Click,
or Click Lock.
Right Click and Middle Click are
only available in Windows.
Now, when you bring the UltraPen tip in proximity without touching the tablet and press the side switch, the
selected mouse button function occurs.
Contents
Index
For Windows: With Left Click Lock
selected, pressing the side switch has the
same effect as holding down the left mouse
button. Pressing the switch again simulates
releasing it.
For Macintosh: Click Lock sets a similar
function for the single mouse button.
Disables the side switch.
Windows screen capture shown.
CUSTOMIZING PENPARTNER
Page 32