Bridge Mode - D-Link AMPLIFI DAP-1525 User Manual

Section 2 - Installation
If you want to wirelessly connect multiple Ethernet enabled devices such as game consoles, media players, or network attached
storage devices you will need to move the switch on the back panel of the DAP-1525 to "Bridge".
To use the DAP-1525 in Bridge Mode, follow the steps below:
1. Ensure you have a broadband Internet connector, such as
a cable or DSL client line that connects the Internet to your
home or office.
2. Connect the cable properly or install the modem.
3. Connect the cable or modem with the broadband Access
Point.
4. Move the switch to Bridge Mode.
5. Connect your PC or notebook to the DAP-1525 using the PC
or notebook's wireless adapter.
D-Link DAP-1525 User Manual

Bridge Mode

13