System - D-Link AMPLIFI DAP-1525 User Manual

Section 3 - Configuration
Save Settings Use this option to save the current access point
to Local
configuration settings to a file on the hard disk of the
Hard Drive: computer you are using. First, click the Save button.
You will then see a file dialog, where you can select a
location and file name for the settings.
Load Settings Use this option to load previously saved access point
from Local
configuration settings. First, use the Browse control
Hard Drive: to find a previously save file of configuration settings.
Then, click the Load button to transfer those settings
to the access point.
Restore This option will restore all configuration settings back
to Factory
to the settings that were in effect at the time the access
Default point was shipped from the factory. Any settings that
Settings:
have not been saved will be lost, including any rules
that you have created. If you want to save the current
access point configuration settings, use the Save
button above.
Note: Restoring the factory default settings will not reset
the Wi-Fi Protected Status to Not Configured.
Reboot the Click to reboot the access point.
Device:
Clear Click to clear the language pack. This will put the web
Language UI back to English.
Pack:
D-Link DAP-1525 User Manual

System

33