Connection - Bridge Mode - D-Link DAP-1525 User Manual

Section 2 - Installation

Connection - Bridge Mode

To use the DAP-1525 in Bridge Mode, follow the steps below:
1. Ensure you have a broadband Internet connector, such as a cable or DSL client line that connects the Internet to
your home or office.
2. Connect the cable properly or install the modem.
3. Connect the cable or modem with the broadband Access Point.
4. Move the switch to Bridge Mode.
5. Connect your PC or notebook to the DAP-1525 using the PC or notebook's wired adapter.
D-Link DAP-1525 User Manual 9