Access Point Mode Settings - D-Link EXO DRA-1360 User Manual

Section 3 - Configuration

Access Point Mode Settings

This page lets you configure the settings to use the DRA-1360 as an access point. Connect an Ethernet cable from a LAN port in your
router to the LAN port at the bottom of the DRA-1360.
To access this page, click the Settings drop-down menu at the top of the page, and select Extender. Click Save to apply the settings
and return to the home page.
Under Existing Network, choose Ethernet to utilize the DRA-1360 as an access point. Refer to "Extender Settings" on page 28 for
more information regarding configuration options.
D-Link DRA-1360 User Manual 23