Section 3 - Configuration
Enable
Click the check box to enable the wireless function. If you do not
Wireless:
want to use wireless, uncheck the box to disable all the wireless
functions.
Wireless
Service Set Identifier (SSID) is the name of your wireless network.
Network
Create a name using up to 32 characters. The SSID is case
Name:
sensitive.
Band Width:
Select the Band Width:
Auto 20/40 - Select if you are using both 802.11n and non-
802.11n wireless devices.
20MHz - Select if you are not using any 802.11n wireless clients.
Enable:
Enable the Wi-Fi Protected Setup feature.
Security
Refer to page 64 for more information regarding wireless security.
Mode:
Wireless MAC Cloning
Enabling this option allows the user to manually assign the
source MAC address to packets forwarded by the DAP-1525. If
not manually assigned, the packet's source MAC address field
will be automatically selected as the DAP-1525's MAC address.
MAC Address:
Enter the desired MAC address connected to your
DAP-1525 to enable the clone function.
Scan:
Click the Scan button to search for all available
devices connected to your DAP-1525's Ethernet
ports
D-Link DAP-1525 User Manual
Wireless
49