Section 1 - Product Overview
1
Wireless LED (AP Mode) A solid green light will indicate that AP Mode is ON.
Wireless LED (Bridge
2
Mode)
3
WPS Button
4
Power LED
D-Link DAP-1525 User Manual
LEDs
1
2
3
4
A solid green light indicates a link has been established. A blinking green indicates the device
is fail to connect to the AP.
Press the WPS button for 1 second to initiate the WPS process. The button will flash green while
a WPS connection is being established. The button will light green for 5 seconds if a successful
WPS connection has been made.
A solid light indicates a proper connection to the power supply.
8