Philips Avent SCD484 Manual

Introduction

To fully benefit from the support that Philips AVENT offers, register your product at www.philips.com/AVENT.
Philips AVENT is dedicated to producing caring and reliable products that give parents the reassurance they need when looking after the health and safety of their baby. This Philips AVENT baby monitor parent unit is designed to be used with models SCD485 and SCD486. Offering the same features, this additional parent unit gives you the reassurance you need to enjoy extra flexibility and freedom when monitoring your baby in and around your home.
For details on the operation, see the User Manual for SCD485 or SCD486.

Important

Read this user manual carefully before you use the baby monitor and save the user manual for future reference.

To prevent strangulation with the power cord, always keep the baby unit and the power cord out of baby's reach, at least 1 meter/3.5 feet away. Do not use extension cords.

Risk of explosion, electric shock, short circuit, or leakage

• The baby monitor shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the baby monitor.
• Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
• Before you connect the baby monitor to the mains, make sure that the voltage indicated on the adapters of the baby monitor corresponds to the local mains voltage.
• Use the supplied adapters to connect the baby monitor to the mains.
• To prevent electric shock, do not open the housing of the baby unit or parent unit except for the battery compartments.
• Make sure that your hands are dry when you insert or replace batteries.
• To prevent battery explosion or leakage, which can damage the baby monitor and cause burns and skin or eye irritation:
  • insert batteries in the right direction (+/-),
  • remove batteries if you are not going to use the product for more than 30 days,
  • keep batteries away from excessive heat such as sunshine, fire or the like,
  • remove batteries as soon as they run out of power.
• To prevent batteries from heating up or releasing toxic materials, hydrogen, or oxygen, do not short circuit or mutilate batteries.

Adult supervision

• This baby monitor is intended as an aid. It is not a substitute for responsible and proper adult supervision and should not be used as such.
• Never place the baby unit inside the baby bed or playpen.
• To prevent overheating, do not cover the baby monitor with a towel, blanket, or any other items.
• When your baby monitor uses a power outlet, make sure that you can easily access the power outlet.
• For their safety, do not allow children to play with the baby monitor.
• To handle damaged or leaked batteries, wear protective gloves to protect your skin.
• Your baby monitor transmits over a frequency that is used by many household products and other baby monitors. Your conversation may be heard by another product that operates on the same frequency.

Cleaning and Maintenance

• Do not immerse the parent unit or baby unit in water, and do not clean them under the tap.
• Do not use cleaning spray or liquid cleaners.
• Unplug the parent unit and baby unit if they are connected to a power outlet.
• Clean the parent unit and baby unit with a damp cloth.
• Clean the adapters with a dry cloth.
• This baby monitor has no other user serviceable parts.

Storage precautions

• Use and store the baby monitor between 10°C (50°F) and 35°C (95°F). Keep the baby monitor out of direct sunlight.
• If you store batteries in a fridge or freezer, protect them from condensation during storage and defrosting. Before you use the batteries, let them return to room temperature.

Replacement

• If you replace the adapters, use the type of adapters specified in this user manual.
• If you replace the batteries, use the type of batteries specified in this user manual. Replace all the batteries in the unit at the same time.

Register your product and get support at www.philips.com/welcome