Ap Configuration - Cisco 1230AG - Aironet - Wireless Access Point Configuration Manual

AP Configuration

28
4. Under
DHCP Information
.
Server
5. Repeat this step for the
6. Click the button and save the changes.
Apply
All handsets operating on a given AP radio must have the same
QoS setting. All APs supporting the handsets must be configured to
enable the corresponding features.
1. Power-on and connect the APs to the network. Wait a few minutes
for the APs to find the controller.
2. Verify the APs are associated to the WLC.
3. From the main menu, click
VIEW Certified Configuration Guide
, enter the IP address of the
interface.
ap-manager
.
Monitor
Primary DHCP
PN: 1725-36192-001_H