Cisco 1230AG - Aironet - Wireless Access Point Configuration Manual page 19

Section 1: SVP
10. Under the
PN: 1725-36192-001_H
Cisco Wireless LAN Controllers with 1100, 1130, 1140, 1200, 1230, 1240, 1250 APs
8. Under the tab, set
QoS
required setting for voice traffic.
9. Set to
WMM Policy
SpectraLink Wireless Telephones using SVP for QoS).
Under the Advanced tab, uncheck the Client Load Balancing & Client
Band Select boxes.
Security
policy from the drop-down list.
a. For WPA2-PSK, under
i. Select the
ii. Select the
iii. At
Auth Key Mgmt
Quality of Service
(Note: This is required for usage with
Disabled
tab. At
Layer 2 Security
WPA+WPA2 Parameters:
check box.
WPA2-Policy
check box for
AES WPA2-Encryption
select
PSK
to . This is the
Platinum
select the desired security
.
from the drop-down list.
19