12 Keep operating area clear of all per- IMPORTANT SAFETY IN- sons. STRUCTIONS 13 Follow the maintenance instruc- tions specified in the manual. WARNING 14 This product is provided with a When using this product basic precau- Ground Fault Circuit Interrupter tions should always be followed, in- built into the power cord plug.
This system is capable of producing water supply mains, local regulations 10400 kPa/1500 PSI (HD 2.3/15 C Ed), of your water company must be ob- 13000 kPa/2000 PSI (HD 3.0/20 C Ea). served. In some areas the unit must...
use with out-door appliances: store in- Please read and comply with doors while not in use." Use only ex- these original instructions tension cords having an electrical prior to the initial operation of your ap- rating not less than the rating of the pliance and store them for later use or product.
20 Lever for hand spray gun Symbols on the machine 21 High pressure hose High-pressure jets can be 22 Push handle dangerous if improperly 23 Cable clamp used. The jet may not be di- 24 Clamping screw for pushing handle rected at persons, animals, live electri- 25 Detergent suction hose with filter cal equipment or at the appliance itself.
If the lever on the trigger gun is re- Activate deaeration of oil con- leased the pressure switch turns off the tainer pump, the high pressure jet is stopped. Unscrew the fastening screws of If the lever is pulled the pump is turned ...
Page 8
Check the power cord with mains plug Water connection for damage before every use. If the power cord is damaged, please ar- Connection to the water supply range immediately for the exchange by Warning an authorized customer service or a Observe regulations of water supplier.
Set the appliance switch to "I". Operation Unlock the hand-spray gun and pull the lever of the gun. Danger Set the working pressure and quan- Risk of explosion! tity by turning the pressure/ quantity Do not spray flammable liquids. regulation mechanism at the pump If the appliance is used in hazardous unit.
Suspend end of suction hose in a Frost protection container filled with detergent. Set nozzle to "CHEM". Warning Set dosing value for detergent to Frost will destroy the not completely the desired concentration. water drained device. Store the appliance in a frost free area. Recommended cleaning method If you cannot store it in a frost-free Spray the detergent sparingly on...
Clean the sieve in the water con- Maintenance and care nection. Clean filter at the detergent suck Danger hose. Risk of injury by inadvertent startup of appliance and electrical shock. monthly or after 500 operating First pull out the plug from the mains hours before carrying out any tasks on the Oil change.
Pressure does not build up in the Accessories and Spare Parts appliance Only use accessories and spare – Set nozzle to "High pressure". parts which have been approved by the manufacturer. The exclusive Clean the nozzle. use of original accessories and Replace the nozzle.
Technical specifications HD 2.3/ HD 3.0/ HD 2.3/ 15 C Ed 20 C Ea 14 C Ed Food Main Supply Voltage Current type 1~ 60 Connected load Protection (slow, char. C) Type of protection IPX5 Extension cord 100 ft/30 m AWG/mm 12/2.5 11/2.5...
Need help?
Do you have a question about the HD 2.3/15 C Ed and is the answer not in the manual?
Questions and answers