Related Manuals for Ubiquiti NanoStation M Series
Summary of Contents for Ubiquiti NanoStation M Series
- Page 1 Translated from Spanish to English - www.onlinedoctranslator.com NanoStationM/locoM-Series Quick Start Guide Package Contents NSM2/NSM3/NSM365/NSM5 PoE (24V, 0.5A) with support NanoStation M2/M3/M365/M5 Flange mounting Mounting bracket locoM2/locoM5 NanoStationlocoM2/M5 PoE (24V, 0.5A) with support Flange mounting...
- Page 2 Category 5 (or higher) shielded cabling with drain wire must be used for all Ethernet connections and must be connected to the PoE AC ground. We recommend that you protect your networks from harmful outdoor environments and electrostatic discharge phenomena with Ubiquiti's industrial-grade Ethernet shielded cable. For more information, please visit ui.com/toughcable Surge protection must be used at all outdoor installations.
- Page 3 Hardware Overview NSM2/NSM3/NSM365/NSM5/locoM2/locoM5...
- Page 5 Power LED The LED indicator will light green when the device is connected to a power source. LAN1 LED The LED indicator will light solid green when the device is connected to an Ethernet network using the main or LAN port and will flash if there is activity. LAN2 LED (NanoStation M2/M3/M5 only) The LED indicator will light solid green when the device is connected to an Ethernet network using the secondary port and will...
- Page 6 Reset button for more than 10 seconds while the device is powered on. You can also reset the device remotely using the reset button located on the bottom of the PoE adapter. * The main port is called LAN on the NanoStationlocoM2/M5. locoM9 Power LED The LED indicator will light green when the device is connected to a power...
- Page 7 LAN1 LED The LED indicator will light solid green when the device is connected to an Ethernet network using the main or LAN port and will flash if there is activity. LED signal indicators In airOS®, you can modify the threshold value for the wireless LED signal strength.
- Page 12 Connecting the power supply WARNING:The port switch must meet the power specifications listed in this quick start guide.
- Page 13 EITHER Optional Accessing airOS Check connectivity in the airOS configuration interface. 1. Check that your host is connected via Ethernet to the device.
- Page 14 The airOS settings interface will open, allowing you to customize your settings as needed. For more information, please refer to the user guide available at ui.com/download/airmax You can also manage your device using the Ubiquiti® Network Management System. Configuration using the UNMS™ application requires the U-Installer, sold separately.
- Page 15 The Antenna Gain and Output Power fields assist the professional installer in meeting regulatory requirements. Specs NanoStation M2/M3/M365/M5 Dimensions 294 x 30 x 80mm (11.57 x 1.18 x 3.15") Weight 0.4kg (14.11oz) NSM2/NSM5 0.5kg (17.64oz) NSM3/NSM365 Revenue NSM2 11 dBi NSM3/NSM365 13.7 dBi NSM5...
- Page 16 NanoStation M2/M3/M365/M5 Operating humidity 5 to 95% non-condensing Operating frequency (MHz) of NSM2/NSM3/NSM365 NSM2 2412 - 2462 NSM3 3400 - 3700 NSM365 3650 - 3675 Operating frequency (MHz) of NSM5 Worldwide 5150 - 5875 5150 - 5350, 5470 - 5725, 5725 - 5875 5150 - 5250 U-NII-1 U-NII-2A...
- Page 17 NanoStationlocoM2/M5/M9 Operating humidity 5 to 95% non-condensing locoM2 Operating Frequency (MHz) Worldwide 2412 - 2462 Operating Frequency (MHz) of locoM5 Worldwide 5150 - 5875 5150 - 5350, 5470 - 5725, 5725 - 5875 U-NII-1 5150 - 5250 U-NII-2A 5250 - 5350 U-NII-2C 5470 - 5725 5725 - 5850...
- Page 18 a. Do not substitute the power cord with anything other than the approved type provided. Never use an adapter plug to connect to a two-wire outlet, as this will disrupt the continuity of the ground wire. b. The equipment requires the use of the ground wire as part of the safety certification. Modification or improper use may result in a shock hazard, which could cause serious injury or death.
- Page 19 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. ISED Canada has approved this radio transmitter. The device for operation in the 5150-5250 MHz band is intended for indoor use only to reduce the potential for harmful interference to co-channel mobile satellite systems.
- Page 20 Note:Operation in the 5.8 GHz frequency band is prohibited in Member States with fixed broadband wireless access. The remaining countries listed may use the 5.8 GHz frequency band. WEEE Compliance Statement Declaration of conformity Online Resources © 2022 Ubiquiti Inc. All rights reserved.
Need help?
Do you have a question about the NanoStation M Series and is the answer not in the manual?
Questions and answers