Subscribe to Our Youtube Channel
Related Manuals for Havis DS-TAB-401
Summary of Contents for Havis DS-TAB-401
- Page 1 Owner’s Manual Havis Tablet Docking Stations and Tablet Cases DS-TAB-401 Tablet Dock TC-4XX Tablet Case (TC-401 shown below) Havis, Inc. 75 Jacksonville Road Warminster, PA 18974 DS-TAB-401^TC-4XX-SERIES_OMN_0325...
-
Page 2: Before Beginning
Before Beginning Havis is pleased to provide this Owner’s Manual to aid in the proper installation and use of the DS-TAB-401 Series Docking Station and TC-4XX Series Tablet Case. For questions regarding the set-up of your DS-TAB-401 Series Docking Station or TC-4XX Series Tablet Case, please contact Havis at 1-800-524-9900 or visit www.havis.com for additional product support and information. -
Page 3: Product Compatibility
Product Compatibility Tablet TC-4XX PKG Number when paired with a Tablet DS-TAB-401 Docking Station and Case Vehicle Power Supply Microsoft Surface Pro 9, 10, & 11th TC-401 PKG-TAB4-MSFT1-DC Edition Apple iPad Pro 13" (M4) TC-402 PKG-TAB4-APP1 Apple iPad Pro 11" (M4) - Page 4 Parts Included (DS-TAB-401) Release Handle Docking Station Barrel Lock Alignment Posts Latch Hook LED Power Indicator Alignment Posts Docking Connector Cable Routing Features (6X) Mounting Holes (x4) (VESA 75mm Hole Pattern) M4 X 0.07mm THREAD Ports...
- Page 5 Parts Included (DS-TAB-401) (continued) Hardware Kit (HWK-0042) This Hardware Kit includes: 1. Zip Ties (5) 2. Keys (2) 3. M4 x 0.7 x 12mm Long Screws (5) 4. Flat Washers, M4 (5) 5. Lock Washers, M4 (5) ...
- Page 6 (Hardware Kit Item 4), and four (4) Lock Washers, M4 (Hardware Kit Item 5), secure the Docking Station to device. Torque screws to 15 in-lbs (1.7Nm) ± 10% A) Havis Desktop Stand installation (sold separately, Part # DS-DA-218). Washer, M4 Lock Washer, M4 M4 x 0.7 x 12mm...
- Page 7 Cable Management (DS-TAB-401) 1) Tip the Docking Station to a position that is comfortable to work with. 2) Install all cables that are necessary for computing needs. 3) Use Zip Ties (Hardware Kit Item 1) and the Strain Relief Points to secure cables and reduce risk of accidental disconnects.
- Page 8 Parts Included (TC-401) Tablet Case (Part ID TC-401 shown assembled with Microsoft Surface Pro 9/10/11 Power and Volume Controls USB Type C Port Access Desk Dock Port Access Keyboard Access Opening Shoulder Strap Clip Mounting Points Kick Stand Docking Latch Pockets Hand Strap (shown assembled)
- Page 9 Parts Included (TC-402,403, 404, 405, 406 and 409) Tablet Case (Part ID TC-403 shown assembled with iPad Pro M4) Power and Volume Controls Apple Pencil Storage Power Button Shoulder Strap Clip Mounting Points Docking Latch Kick Stand Pockets Hand Strap (shown assembled) shown in extended position Docking Connector...
- Page 10 Parts Included (TC-4XX) Tablet Case Front Tablet Case Back Tablet Case Assembly Hardware Kit (HWK-0055) This Hardware Kit includes: 1. M2.5 , 6mm long Washer Head Screws (12) 2. T8 Torx Bit, ¼” Hex Shank (1) Tools required for installation: •...
- Page 11 Installation (TC-4XX) IF A SCREEN PROTECTOR IS BEING USED ON TABLET (NOT INCLUDED), ASSEMBLE BEFORE BEGINNING TABLET CASE INSTALLATION. 1) Assemble hand strap by guiding each end through the slots on the Back Assembly of Tablet Case. Adjust loop size as desired and secure on the hook featured of the rear housing. Smallest hand strap setting Largest hand strap setting 2) With the front cover removed.
- Page 12 Installation (TC-401 shown as example) 3) Lower the Tablet into the rear housing. Ensuring that the connector cable is routed properly, being careful not to pinch cable. 4) Place the Front Assembly of the Tablet Case on the Back Assembly. Ensure a proper fit by looking for gaps along the seam between the two pieces.
- Page 13 Installation (TC-401 shown as example) Holding the two Assemblies together, carefully turn the Tablet Case over. Insert all the necessary screws (Hardware Kit Item 1) and tighten with provided T8 Torx Bit (Hardware Kit Item 5). Torque screws to 4 in-lbs (0.45Nm) ± 10%. CAUTION: DO NOT OVERTIGHTEN SCREWS OR DAMAGE TO TABLET CASE MAY OCCUR.
- Page 14 Tablet Case Features (TC-4XX) The Kickstand on this tablet case can hold the tablet through a wide range in the landscape orientation. Wide range of angles available in landscape orientation With the kick stand moved access is open to a USB C Port that connects to your tablet.
-
Page 15: Operation - Docking
Operation - Docking DO NOT FORCE TABLET CASE INTO DOCKING STATION. IF THERE IS RESISTANCE, CHECK ALIGNMENT OF TABLET CASE ON DOCKING STATION. NOTE: Ensure a proper connection by aligning the Tablet Case’s Alignment Pockets with the Docking Station’s Front Hooks Front Hooks on the Alignment Pockets on the bottom piece DS-TAB-200 Series Docking Station... - Page 16 Operation – Docking (continued) 3) Pivot Tablet Case into the Docking Station until the Docking Station’s Latch Hook engages with the Latch Hook Recess on the Tablet Case. A click will be heard when docked correctly. 4) For theft deterrence, secure Tablet Case by locking Docking Station with supplied key (Hardware Kit Item 2).
-
Page 17: Operation - Undocking
Operation - Undocking 1) If previously locked, unlock Docking Station using the supplied key. 2) While holding Tablet Case with one hand, lift the Release Handle on the top of Docking Station. 3) While lifting the Release Handle grab the side of Tablet Case, rock the top forward and carefully lift out of Docking Station, top end first. -
Page 18: Regulatory Information
• Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Responsible party (contact for FCC matters only): Havis, Inc. 75 Jacksonville Road Warminster, PA 18974 havis.com/contact-us... - Page 19 Conformité Européene (CE) Mark The CE marking on a Havis product indicates conformity to the provisions of applicable European Union (EU) directives. The EU Declaration of Conformity (DoC) is the manufacturer’s declaration that the product complies with those directives.
-
Page 20: Related Products
Related Products Havis offers a wide variety of accessory products specifically for use with your Docking Station and Protective Case. For more information or to order, please visit www.havis.com. C-MD-401/402 and PKG-FAM-118 Universal Rugged Articulating Phone & Tablet Mounts Light weight mounts are an ideal mobile solution for tablet,...
Need help?
Do you have a question about the DS-TAB-401 and is the answer not in the manual?
Questions and answers