Stop Marker - Pioneer DVD-V7400 Command Protocol Manual

The available address modes are listed below:
Address Mode
FR (Frame)
TM (Time)
CH (Chapter)
TI (Title)
BK (Block)
IX (Index)
TR (Track)
Execution :
String
CH5SL<CR>
TR2SL<CR>
5.18

Stop Marker

Function : Stop Marker is set to the specified address
Format : Address SM
Explanation :
Mark-Chapter Register in accordance with the address specification flag.
The player returns the completed status message immediately.
The Stop Marker is cleared when the player reaches the marked address via
a Play command, a Multi-Speed operation or other action. The player enters
the Pause mode (CD) or the Still mode (other disc types) with no messages
returned. However, if the disc program does not allow a pause, the player
ignores the command.
If the Frame count difference is less than 24 Frames between the present
Frame and the stop marker address, the player returns an E06 error
message and the marker is not set.
A Time Code or Chapter Number request notes if the player reaches the
marked address. The Clear and Reject commands remove the marker.
DVD
X
X
X
Status Return
R<CR>
R<CR>
The specified address is written into the Mark-Frame Register or
- 24
LB-
CD
compatible
DVD
X X
X
X
X
X
X
DVD player
Play mode
Search Chapter 5 and Play
Search Track 2 and Play
Command Descriptions
VCD
X
X