Search - Pioneer DVD-V7400 Command Protocol Manual

Integer
60
30
15
7
4
1
NOTE: VCD only offers 1/2 to 1/16 forward speeds. Reverse speed is not
available for VCD.. Speeds are approximate values only.
Execution :
String
4SPMF<CR>
30SP<CR>
4SPMR<CR>
5.16

Search

Function : Search to specified address
Format : Address SE
Explanation :
accordance with the current Search address mode.
When the Search command is sent to the player, the specified address is
compared with the current address.
difference becomes 0.
Upon reaching the specified address, the player enters the Pause mode for a
CD or the Still mode for others disc types. The player then returns the
completed status message. If the player misses the specified address or can
not find it, an error message (E06 or E12) is returned. However, if the disc
program disallows a Time or Chapter Search, the player ignores the
command and an error message (E04) is returned. In addition, if the disc
program blocks the Pause command, the player ignores the command.
The DVD-V7400 does not accept other commands during the execution of a
Search command, returning an E04 error message. After issuing a Search
command, wait until the Return (R) status appears before issuing another
command. An exception to this rule is the Mark Frame Play command (i.e.
FR1200PL), when it is unnecessary to wait for the R status before sending
additional commands.
Speed Parameter
46~90
23~45
12~22
6~11
3~5
0~2
Status Return
R<CR>
R<CR>
R<CR>
The specified address is written into the Search Register in
- 22
Command Descriptions
Speed
1/1
½
¼
1/8
1/16
Step1
DVD player
Play mode to 1 speed forward
/
16
Multi-Speed to ½ Multi-Speed
1 speed reverse
/
16
The pick-up is moved so that the