Pioneer DVD-V7400 Command Protocol Manual page 32

The Stop Marker is the same in functionality as the Play (or Multi-Speed)
Auto Stop commands. The primary difference is when the player return a
status message.
completed status message when the player reaches the marked address.
The Stop Marker command returns the message as soon as the Stop Marker
is set.
The available address modes are listed below:
Address Mode
FR (Frame)
TM (Time)
CH (Chapter)
TI (Title)
BK (Block)
IX (Index)
TR (Track)
Sometimes, an Auto Stop command within a VCD Block Number Address
misses the specified address. Depending upon when the command is sent, a
playback address may be missed by a maximum of a few ten-Blocks.
Execution :
String
TM0325SMPL<CR>
MF<CR>
PL<CR>
The Multi-Speed Auto Stop command returns the
LB-
DVD
compatible
DVD
X X
X X
X X
X X
Status Return DVD player
R<CR> Pause mode to Play mode
R<CR> Multi-Speed mode
R<CR> Play mode
plays to 3 minutes 25 seconds
⇒ Still mode
- 25
Command Descriptions
CD VCD
X X
X
X X
X X