Display Control - Pioneer DVD-V7400 Command Protocol Manual

5.35

Display Control

Function : Character display is turned ON / OFF
Format : Integer DS
Explanation :
returns the completed status message.
(display switched OFF). Arguments can display User's Area Characters, Title
Number, Time Code, Chapter Number and Audio Output information.
NOTE: Argument 2 through 6 are available through the remote control.
Display changes are restricted when Argument 1 is set through the serial
connection.
display.
NOTE: The displayed Frame number attempts to auto-correct to the actual
Frame number, however, Frames continue to advance during playback.
Argument
0
1
2
3
4
5
6
Execution :
String
1DS<CR>
3DS<CR>
DS<CR>
The player rewrites the Display Control Register (argument) then
The remote control is blocked from changing the on-screen
Function
OFF
Displays user's area that is set by Register A
Title, Chapter, Track number, play time
Remain time and total time based on each Title
Title, Chapter, play time
Play time or remain time based on each Chapter
Title, Chapter, Track number, play time
Play time or remain time based on each Chapter (or Track)
Title, Chapter, play time
Transfer rate
Title, Chapter, play time
Frame number, total Frame based on each Title
Status Return
R<CR>
R<CR>
R<CR>
- 33
Command Descriptions
The default register value is 0
DVD player
Display Switch = OFF to
Display Switch = ON
Display condition is set on
Register A
Display condition = 3
Display Switch = OFF