Auto Cue Function; To Stop Playback; To Temporarily Interrupt Playback (Pause Mode); To Change Language/Subtitle Settings During Playback (Dvd Only) - Pioneer DVJ-X1 Operating Instructions Manual

TIME MODE/AUTO CUE
SUBTITLE
AUDIO
CUE
PLAY/
PAUSE

Auto cue function

# This function is not supported when the rear panel mode select
switch (MODE NORMAL/DJ) is set to the NORMAL position.
This function is used to skip non-recorded (silent) portions at the begin-
ning of tracks and automatically set the cue point ( P. 36) immediately
before actual sound begins when loading a disc, performing track search
(chapter search), and when the playback track (chapter) changes.
I Setting auto cue ON/OFF
Hold the TIME MODE/AUTO CUE button depressed for 1 second or
more to alternate the auto cue function ON/OFF. The display's auto cue
indicator (A.CUE) lights when the auto cue function is active.
¶ The auto cue function ON/OFF status is memorized even when the
player's power is turned off.
¶ The auto cue sensitivity level can be changed if desired.
I Changing the auto cue sensitivity level
1. Hold the TIME MODE/AUTO CUE button depressed for 5
seconds or more.
¶ The display will show the "A.CUE –60dB" indicator (factory de-
fault setting).
2. Press the cursor button's left/right sides (2/3) to change
the sensitivity level.
¶ Supported sensitivity levels include: –36 dB, –42 dB, –48 dB,
–54 dB, –60 dB, –66 dB, –72 dB, –78 dB.
¶ Either press the TIME MODE/AUTO CUE button or wait 15 sec-
onds and the setting mode will be canceled and the newly se-
lected level will be set.
¶ The newly set sensitivity level is memorized even when the play-
er's power is turned off.

To stop playback

I When the eject/stop mode select switch (UNLOCK/LOCK)
is set to UNLOCK: Press the STOP button.
I When the eject/stop mode select switch (UNLOCK/LOCK) is set
to LOCK: During playback, press the PLAY/PAUSE (6) button,
or if a cue point has been set, during playback press the CUE
button to initiate back cue, then press the STOP button.
¶ When STOP button is pressed in the NORMAL mode during DVD
playback, the "RESUME" message will be displayed, and the place
where the disc is stopped will be stored in memory (resume function).
¶ To resume playback from the place earlier stopped, press the PLAY/
PAUSE (6) button.
¶ The resume function is canceled if the disc is removed or if the STOP
button is pressed again while already in the stop mode.
UNLOCK/LOCK
MODE
STOP
NORMAL/DJ
TOUCH/
BRAKE
RELEASE
/START

To temporarily interrupt playback (pause mode)

During playback, press the PLAY/PAUSE (6) button.
¶ The outer rim indicators of the PLAY/PAUSE (6) button and CUE
button will flash, and playback will be interrupted.
¶ Some DVDs prohibit the use of playback pause; in this case pressing
the PLAY/PAUSE (6) button will cause the prohibited mark
light, and the corresponding prohibited mark
preview monitor.
¶ If the PLAY/PAUSE (6) button is pressed when the unit is in the
pause mode, the button rim indicators will go out and playback will
resume.
¶ If the pause mode is allowed to continue for 80 minutes or more, the
disc playback will automatically stop. In this case, press the PLAY/
PAUSE (6) button to resume playback.
[In DJ mode, with jog mode set to VINYL mode OFF]
¶ Placing the player in pause mode enables audible pause (the video
image appears as a still image, but audio sound can be heard inter-
mittently). If sound is not desired in this case, lower the audio mixer's
output level.
[In DJ mode, with jog mode set to VINYL mode ON]
¶ Placing the player in pause mode enables silent pause (still image
with no sound).
¶ The TOUCH/BRAKE response dial can be used to modify the disc's
deceleration speed (time until playback stops).
¶ The RELEASE/START response dial can be used to modify the disc's
playback acceleration time (time until disc reaches full playback speed).
[In NORMAL mode]
¶ Placing the player in pause mode enables silent pause (still image
with no sound).
To change language/subtitle settings
during playback (DVD only)
I To change language during playback:
The language setting can be changed during playback when the DVD
has been recorded with multiple language options.
Press the AUDIO button.
The currently selected audio (language) option will be displayed on the
screen. Each time the button is pressed the language will alternate be-
tween the available language options.
¶ If the language is changed when the player is in DJ mode, both video
and audio playback will be temporarily interrupted (due to writing to
buffer memory).
¶ Some discs do not allow the audio language option to be changed
with the AUDIO button (pressing the button will cause the prohibited
mark to light, and the corresponding prohibited mark
pear on the screen). In this case, go to the disc's main menu to switch
the language option.
¶ When a disc is removed from the player, the language setting will
revert to that selected on the Setup Menu ( P.26).
¶ With some discs, changing the language will cause the image to pause
momentarily.
I Changing the subtitle option during playback
# This option is not supported when the rear panel mode select
switch (MODE NORMAL/DJ) is set to DJ (subtitles are not dis-
played in DJ mode).
The subtitle language can be changed when the DVD has been recorded
with multiple subtitle language options.
Press the SUBTITLE button.
The currently selected subtitle option will be displayed on the screen.
Each time the button is pressed, the subtitle language will alternate be-
tween the available options; if OFF is selected, subtitles will not appear.
¶ Some discs do not allow the subtitle option to be changed with the
SUBTITLE button (pressing the button will cause the prohibited mark
to light, and the corresponding prohibited mark
the screen). In this case, go to the disc's main menu to switch the
subtitle language.
¶ When a disc is removed from the player, the subtitle setting will re-
vert to that selected on the Setup Menu ( P.27).
Basic Operations
to
will appear on the
will ap-
will appear on
33
<DRB1388> En