DVD Player DVD-V5000 Operating Instructions Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 2
NONUSE PERIODS – The power cord of the POWER SERVICE GROUNDING appliance should be unplugged from the outlet Fig. A ELECTRODE SYSTEM when left un-used for a long period of time. (NEC ART 250, PART H) NEC — NATIONAL ELECTRICAL CODE D1-4-2-2_En Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 3
NEC Corporation. copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 4
÷ This component may not stand up to continuous long use in severe environ- ments. ÷ Pioneer disclaims all responsibility for any losses or other incidental dam- ages arising from accidents or other use of this component. We Want You Listening For A Lifetime Used wisely, your new sound equipment will provide a lifetime of fun and enjoyment.
Zooming the screen ..........36 MPEG Out ............20 Video Output settings ......... 21 07 Audio Settings menu TV Screen ............21 Audio DRC ............37 S-Video Out ............21 Virtual Surround ..........37 Still Picture ............21 Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 6
Stack Settings ..........58 Command Structure ........73 Grouping Barcode Stacks and Glossary ............... 76 Command Stacks ........59 Trobleshooting ............. 77 Create a Group ..........59 Specifications ............79 Switch Between Groups ......... 59 Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
SRS Labs, Inc. TruSurround technology is incorporated under license from Logo: SRS Labs, Inc. SRS TruSurround creates a realistic surround- sound effect from any Dolby Digital source using just two speakers. SRS TruSurround is a process Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• Remote controllers for different devices can interfere with each other. Avoid using remotes for other equipment located close to this unit. • Replace the batteries when you notice a fall off in the operating range of the remote. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Discs discs. marked ALL will play in any player. • Unfinalized CD-R/RW discs recorded as CD Audio can be played, but the full Table of Contents (playing time, etc.) will not be displayed. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Use the supplied audio/video cable when You may find it useful to have the manuals connecting these jacks. Match the colors of the supplied with your other components handy jacks and cables for correct stereo sound. when connecting this player. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
S-video cable for the video connection. PROGRSSIVE on the front panel to switch the player back to Interlace. Connect the supplied AC power cable to the AC IN inlet, then plug into a power outlet. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• To set up the player for use with a progres- to Interlace. Press PROGRSSIVE on the sive scan TV, see About progressive scan front panel to switch the player back to video on page 15. Interlace. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
For a coaxial connection, use a coaxial this player and the mono end to your TV. cable (similar to the supplied video cable) to connect the DIGITAL AUDIO OUT jack to a coaxial input on your AV receiver. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
8 ENTER & cursor buttons 15 DISC IN Use to navigate on-screen displays and menus. Flashes during disc discriminating, and lights Press ENTER to select an option or execute a when a disc is loaded, command. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
VIDEO OUT (composite) and S (S-video) jacks. If you want to display video on more than one monitor simultaneously, make sure that it is set to Interlace. Press PROGRSSIVE on the front panel to switch the player back to Interlace. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
6 ENTER & cursor buttons Use to navigate on-screen displays and menus. Press to jump to the next chapter or track. Press ENTER to select an option or execute a command. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Disc Navigator screen. See Using the Disc Current / Total Elapsed Remain Total Navigator to browse the contents of a disc Title 0. 05 00 19. 55 20. 00 Frame 36000 on page 30. English Audio Subtitle Angle Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
) to change the highlighted item and pressing need to use for that screen. ENTER to select it. STANDBY/ON ENTER TOP MENU MENU STEP PLAY/PAUSE ENTER HOME PROGRESSIVE MENU RETURN POWER PLAY PROGRAM DISC IN KEY LOCK DISPLAY STANDBY/ON RETURN HOME MENU Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Make the setting you want. The language options shown in the on- screen display illustrations on the following pages may not correspond to those available in your country or region. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
DTS disc. MPEG audio compatible. • DTS sound is no output from the AUDIO OUT (analog audio output) jacks. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Initial Settings Digital Audio Out TV Screen Video Output S-Video Out Language Still Picture Display Option If you find that the picture is stretched or distorted on the default S2 setting, try changing it to S1. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
136 languages listed in the Language Code See Language Code List on page 67 for a List on page 67. complete list of languages and codes. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Subtitle Language and Auto Language settings. Set to Assist Subtitle to have the player display the extra assistive subtitles recorded on to some DVD discs. Set to Off to switch subtitles off altogether. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• Default setting is Blue. Initial Settings Digital Audio Out On Screen Display Blue Video Output Angle Indicator Black Language Background Display Screen Saver Option This specifies the color of the screen when the player is stopped. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
See reset the player to its factory settings (see Resetting the Player on page 66 for how to Resetting the Player on page 66), then reset the player. register a new password. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
You can’t lock level 1. Press ENTER to register the new pass- word and return to the Option menu Press ENTER to set the new level and screen. return to the Option menu screen. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 27
(cursor up/down) to change the Country code. Initial Settings Parental Lock : Change Country Code Digital Audio Out * * * * Video Output Password Language Display Country Code List Code Option 2 1 1 9 Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
29 for more on how to navigate these. jumps to the start of the selected chapter or track. STANDBY/ON Disc tray TOP MENU MENU STEP PLAY/PAUSE ENTER HOME PROGRESSIVE RETURN MENU POWER PLAY PROGRAM DISC IN KEY LOCK DISPLAY STANDBY/ON PLAY/PAUSE STEP Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Highlights a numbered menu (remote option (some discs only). Press ENTER to select. buttons) TOP MENU TOP MENU MENU MENU ENTER ENTER HOME HOME MENU MENU RETURN RETURN TOP MENU MENU ENTER HOME MENU RETURN Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Select a title, or a chapter within a title. Disc Navigator Title (1-10) Chapter (1-003) Title 01 Chapter 01 Chapter 02 Title 02 Title 03 Chapter 03 Title 04 Title 05 Title 06 Title 07 Title 08 Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Current / Total Angle • Some discs only allow you to change audio language from the disc menu. Press TOP MENU to access. • To set audio language preferences, see Audio Language on page 23. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
During playback, press (pause) (PLAY/ • When changing direction with a DVD disc, PAUSE or STEP on the front the picture may “move” in an unexpected panel). way. This is not a malfunction. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• After pressing ENTER, playback jumps back Search Mode Repeat Off to the start point and plays the loop. Command Stack • The minimum loop time is 2 seconds. To resume normal playback, select “Off” from the menu. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Track 05 Program Playback Stop Track 06 Search Mode Program Delete Track 07 Command Stack Program Memory Track 08 After pressing ENTER to select the title/ chapter/track, the step number automati- cally moves down one. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• You can save program lists for up to 24 discs. After that, the oldest one is replaced with the new one saved. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• If you are displaying subtitles, these will R/RW discs. disappear when the screen is zoomed. They • The frame search function cannot be used will reappear when you return the screen to with a VR format DVD-RW. normal. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
(cursor left/right) buttons to change to “On” or “Off,” as required. Audio Settings Audio Settings Video Adjust Audio DRC Virtual Surround Play Mode Disc Navigator Press ENTER to make the setting and exit Initial Settings the Audio Settings screen. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 38
See Digital Audio Out settings on page 19 for how to set up the digital output formats. • How good the surround effect is varies with the disc. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• Fine Focus – Switch On to reveal greater detail (high resolution) in the picture. • Contrast – Adjusts the contrast between light and dark elements in the picture. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• Use the buttons (cursor left/right) to adjust the current setting. • Press DISPLAY to switch between full and single view. • You can change the preset number from the Recall Settings menu item. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
(cursor left/right) buttons to single track. alternate between Single and All (Default TITLE: A single title is repeated. setting is Single). DISC: All content on the disc plays back again (repeats). Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
The screen displays the ADV. SETUP menu. 15 Pin: When connecting to a PC using Use the (cursor down) button to a Pioneer or other brand 15-pin select POWER ON START. to 9-pin cable. 9 Pin: When connecting to a PC using a commercial 9-pin cross-cable.
Page 43
The selected group is automatically set “Stack Repeat” function. Setting to turn on player power only When selecting a title, enter a title which is not on the disc. Example: Enter title 99. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
ADV. SETUP menus is OPEN/CLOSE button, the front panel’s closed. The newly selected KEY LOCK button, or the RS-232C Tray Open setting only takes effect when the temporary command. suspension is ended. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Flashes for 2 seconds when the front panel’s control button or the remote control’s OPEN/CLOSE button is pressed. [Lighted] Disable Disable Flashes for 2 seconds when the front panel’s control button or the remote control button is pressed. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Press HOME MENU to return from Extend 6. GROUP 1 SCAN FWD 7. GROUP 2 SCAN REV Terminal Setting menu to the idle condition. 8. GROUP 3 SKIP FWD Move Select ENTER Exit HOME MENU Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 47
Current 1. nothing PLAY STOP PAUSE STEP FWD 5. ENTER STEP REV 6. GROUP 1 SCAN FWD 7. GROUP 2 SCAN REV 8. GROUP 3 SKIP FWD Move Select ENTER Delete CLEAR Exit HOME MENU Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Terminal Setting menu to the ADV. SETUP menu. • Press HOME MENU to return from Extend Terminal Setting menu to the idle condition. • Changed settings are saved within the player even if the power is disconnected. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
CDs. Retain data in player memory after input Page 57 • The player allows a maximum of 300 step. Command execution • The recorded data is preserved even if the Page 62 power is disconnected. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• Instructions for using this menu screen are However, the order of commands cannot be available in the following sections. changed. • To set a barcode stack/command stack, use either a barcode reader (sold separately) or the remote control. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• When barcodes are used to operate the player, On Screen Displays (OSD: operation indicators such as [Play] and [Stop]) do not Move Select ENTER Return RETURN Exit HOME MENU appear. • Commands other than DVD barcodes are ignored. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 52
This method is unavailable for fewer than 24 frames. Command Stack • Frame search and frame segment playback Group(1-001) Command(0-000) cannot be used with VR formatted DVD-RW Group001 SEGMENT PLAY discs. CHAPTER PLAY COMMAND Downloaded From DvDPlayer-Manual.com Pioneer Manuals Move Select ENTER Return RETURN Exit HOME MENU...
Page 53
By inputting ANGLE the subtitle, audio, and angle setting CANCEL commands before the frame interval play command, the selected settings are applied to the selected playback interval. Move Select ENTER Return RETURN Exit HOME MENU Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 54
Command Stack Group(1-001) Command(1-001) Group001 001 S03:123000-129000 PLAY PAUSE STOP 002 03:010000-015000 STEP REV STEP FWD WAIT 000 sec. REPEAT GROUP GO TO GROUP DIVIDE GROUP MERGE GROUP Move Select ENTER Return RETURN Exit HOME MENU Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 55
GO TO GROUP - 002 GO TO GROUP - 007 REPEAT can be executed in sequence. GROUP - 002 GROUP - 007 GO TO GROUP - 004 GO TO GROUP - 010 Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
• When a command is used to “preserve the previous status,” an asterisk (*) appears on the input screen. • If an input number does not correspond to a number actually recorded on the disc, the command stack is ignored. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
03 2 1 SEGMENT PLAY Group(1-001) Command(1-002) CHAPTER PLAY Group001 001 03:123000-129000 COMMAND 002 05:03-07 03 2 1 STACK CORRECTING Move Select ENTER Return RETURN Exit HOME MENU Move Select ENTER Delete CLEAR Exit HOME MENU Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Select ENTER Return RETURN Exit HOME MENU Save the change. Changes are only saved when “OK” is highlighted and ENTER is pressed. If “CANCEL” is highlighted when the ENTER is pressed, all corrections are lost. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
HOME MENU Move Select ENTER Exit HOME MENU From this point, you can select the next Press ENTER then use the (cursor barcode stack/command stack step for the up/down) buttons to select “DELETE group. GROUP.” Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Group splits are only saved when “OK” is Move Select ENTER Delete CLEAR Exit HOME MENU highlighted and ENTER is pressed. Press ENTER. If “CANCEL” is highlighted when the ENTER is pressed, all divisions are removed. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
STEP FWD control to set the unit to Standby mode (the WAIT 000 sec. power indicator changes to orange). REPEAT GROUP GO TO GROUP DIVIDE GROUP MERGE GROUP Move Select ENTER Return RETURN Exit HOME MENU Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
The set group begins executing. functions will reject a search command. When playing VR formatted DVD-RW discs, steps including frame search or frame segment play commands are ignored and operation skips to the next step. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
CD/DVD cleaning kit to business card sized are not recommended for clean a disc more thoroughly. Never use benzine this product. Pioneer disclaims all liability arising or any other cleaning agents, including products in connection with the use of shaped discs.
If it needs to be • Use in a well-ventilated room. replaced, ask your nearest Pioneer authorized • Place on a solid, flat, level surface, such as service center or your dealer for a replacement.
4:3 (Pan&Scan), widescreen discs are shown The diagram below shows the various DVD with the left and right sides cropped. While the regions of the world. picture appears larger, the visible area is actually reduced. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
ON time to a working condition or maintenance timing of Using the front panel buttons, hold down and press STANDBY/ON to turn the player back on. The settings have returned to the defaults. PROGRESSIVE POWER STANDBY/ON Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Netherlands, 1412, nl Thailand, 2008, th Denmark, 0411, dk New Zealand, 1426, nz United Kingdom, 0702, gb Finland, 0609, fi Norway, 1415, no USA, 2119, us France, 0618, fr Pakistan, 1611, pk Germany, 0405, de Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Function Assignment Create a Circuit Controller or a Diode Matrix Circuit (refer to the table below). Diode Assignment List (Standard setting and User default setting) ENTER Function ENTER STACK GROUP1 STACK GROUP2 STACK GROUP3 OPEN/CLOSE DISPLAY Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
UP ARROW ( ) DOWN ARROW ( ) LEFT ARROW ( RIGHT ARROW ( ENTER GROUP1 GROUP2 GROUP3 Please refer to the “DVD-V5000 COMMAND PROTOCOL MANUAL” for details about the serial control and the extend terminal control. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Additional information Interface Connector A computer may be connected to the DVD-V5000 using a 15-pin D-Sub connector (e.g., a JAE DALC- J15SAF connector with a suitable plug such as the JAE DA-15PF-N) to the RS-232C serial port or to the parallel port.
Command and Status more Than Standby mode Power ON 100 msec During normal operation when a computer transmits commands to a DVD-V5000, the player responds with the status message, “execution more Than Power ON mode Power OFF 100 msec complete”.
Panic Unrecoverable Error occurred – possible that a disc cannot be loaded and/or playing cannot continue Command Structure The DVD-V5000 supports the commands listed below. COMMAND SUPPORTING FORMAT Name Mnemonic Open...
Page 74
Player Model Name Request Advanced Setup Request Player Region Code Request CCR Mode Request Input Number Request Error Code Request Firmware Version Request Input Unit Request Input Barcode Data Request Register A Request Register D Request Menu Call Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
(without which means 44,100 samples (measurements) distorting or getting lost in noise). Dolby Digital per second. See also Digital audio. and DTS soundtracks are capable of a very wide range, delivering dramatic cinema-like effects. Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Cannot use the remote control. or the take the player to your nearest PIONEER Operate within the usage range of the authorized service center. remote control (page 8).
Page 78
Use them separated from this player. Cannot control the player with RS-232C interface. Confirm the “SERIAL PORT” setting in ADV. SETUP menu (page 42). Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Output level ........1 Vp-p (75 Ω) Jack ............RCA jack Audio output (1 stereo pair) Output level ......During audio output 200 mVrms (1 kHz, –20 dB) Number of channels ..........2 Jack ............RCA jacks Downloaded From DvDPlayer-Manual.com Pioneer Manuals...
Page 80
Should this product require service in the U.S.A. and you wish to locate the nearest Pioneer Authorized Independent Service Company, or if you wish to purchase replacement parts, operating instructions, service manuals, or accessories, please call the number shown below.