Register D Set; Print Character - Pioneer DVD-V7400 Command Protocol Manual

Argument Function
0 (default)
64
128
192
6.16

Register D Set

Function : current setting of Register D is rewritten
Format : Integer RD
Explanation :
communication (RS232). There are two choices, "CR" or "CR + LF". The
default for Register D is 0.
Argument
0 (default)
64
6.17

Print Character

Function : Characters are written into the User's Display Area
Format : Integer PR <CR>
Explanation :
Display Area (turn ON the User Display Specification in Register A).
Follow the instructions listed below to create printed characters.
1. Specify the line number using an integer in the range 0 ~ 9
2. Enter the command character PR
3. Enter the terminate code <CR>
4. Specify the character string to enter in the next command string
(enter a character string up to 32 characters in length)
Normal
Audio SQ invalid
Video SQ invalid
VD/AD SQ invalid
Register D contains the termination setting of the serial
Function
CR
CR + LF
(Not to be issued simultaneously with other commands)
Character string <CR>
The command writes a character string for one line into the User
- 64
Current Address Request Descriptions