Page 1
OPERATOR S MANUAL CONCRETE SAWS MODELS: CC3500 CC3700 CC6500 CC7100 CC7200 IMPORTANT: READ MANUAL AND SAFETY PRECAUTIONS BEFORE OPERATING!
Page 2
Select an option below to find your Equipment We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull,...
Page 4
CONCRETE SAW OPERATING INSTRUCTIONS ASSEMBLY blade shaft speed. (See chart in saw parts list for correct blade speeds and governor settings.) Handles must be turned around and attached properly. Place in position, set to desired height and securely tighten TO MANEUVER SAW knobs.
Page 5
Check hydrostatic transmission oil daily. Check level in transparent oil reservoir. When adding oil use SAE 30 API CC3500: Maximum Blade Capacity for this saw is 30” classification SE, CC, CD or better. Do not use multiple CC3700: Maximum Blade Capacity for this saw is 36”...
Page 6
EQUIPMENT AND PARTS WARRANTY Discount-equipment warrants all equipment sold by it against defects in workmanship or materials for a period of one (1) year from the date of shipment to Customer. The responsibility of Discount-equipment under this Warranty is limited to replacement or repair of defective parts, of such parts as shall appear to us upon inspection at such parts, to have been defective in material or workmanship, with expense for transportation and labor borne by Customer.
Page 7
Select an option below to find your Equipment We sell worldwide for the brands: Genie, Terex, JLG, MultiQuip, Mikasa, Essick, Whiteman, Mayco, Toro Stone, Diamond Products, Generac Magnum, Airman, Haulotte, Barreto, Power Blanket, Nifty Lift, Atlas Copco, Chicago Pneumatic, Allmand, Miller Curber, Skyjack, Lull,...
Need help?
Do you have a question about the CC3500 and is the answer not in the manual?
Questions and answers