Optional Hp Retail Rp7 Vfd Customer Display; Installing The Vfd Customer Display Without Poles - HP RP7 Model 7800 Maintenance And Service Manual

Optional HP Retail RP7 VFD Customer Display

Description
VFD customer display, pole
VFD customer display, bracket
VFD customer display, cable kit (includes USB power cable and VFD cable)
The integrated VFD customer display can be installed with no poles attached, or with one or two
poles attached, depending on the desired height of the VFD. There are two recommended
procedures for installing the VFD customer display: one procedure without poles attached and
another procedure with poles attached.

Installing the VFD Customer Display Without Poles

1. Prepare the computer for disassembly
2. Remove the rear I/O panel
3. Remove the power supply cover
4. Remove the decorative panel
5. Route the VFD extension cable that was included with the VFD through the rear of the base and
out the front of the base (1), then though the cable retainer (2). Connect the extension cable to
the I/O cable included with the VFD (3) and connect the I/O cable to the 12V USB port on the
RP7.
72 Chapter 8 Removal and Replacement Procedures
(Preparation for Disassembly on page
(Rear I/O Panel on page
(Power Supply Cover on page
(Decorative Panel (IMD) on page
49).
47).
48).
Spare part number
702783-001
702784-001
702785-001
46).